380ton Variable Pump Injection Molding Machine

Posted on

  • Model NO.: KWV380
  • Structure: Horizontal
  • Plasticizing Way: Screw Type
  • Automation: Automatic
  • Clamp Force: 380ton: Shot Weight: 1550g
  • Transport Package: Plastic Film
  • HS Code: 8477101090
  • Type: PP, PE, PC, PA, ABS, Pet, PVC etc.
  • Plastic Type: Thermoplastic
  • Clamping Way: Hydraulic & Mechanical
  • Computerized: Computerized
  • Trademark: Kingway
  • Origin: Ningbo China

KW Variable Pump Injection Molding Machine

KWV series high efficiency energy saving variable pump injection molding machine is equipped with high efficiency and high response proportional variable pump system. The power output is automatically matched according to the machine action. There's no waste of high pressure throttle and overflow power. It has sensitive dynamic following performance. In comparison with the traditional injection molding machine, energy saving reaches 20-40%. At the same time, it saves water and oil 20-40% that greatly increase profit. This machine applies high performance precise oil filter which keeps the oil pollution grate below NAS8 while in normal continuous working.
380ton Variable Pump Injection Molding Machine

Ningbo Kingway Machinery Co., Ltd
Technical parameter
Item  Unit      Model KW380
Injection unit
Screw type / A B C
Screw diameter mm 70 75 80
Shot volume(theoritical) cm3 1501 1723 1960
Injection weight (PS) g 1350 1550 1764
Injection rate g/s 335 384 437
Injection pressure Mpa 174 152 133
Screw rotation speed  r.p.m 160
Clamping unit
Clamping force KN 3800
Open stroke mm 700
Space between tie bars(W*H) mm 720*700
Max. mould height mm 780
Min. mould height mm 250
Ejector stroke mm 150
Ejector force KN 79
Others
Max. Pump pressure Mpa 14
Pump motor power KW 37
Heating power KW 29.4
Machine dimension(L*W*H) m 7.6*1.85*2.4
Machine weight  t 15.5

 
 
 

Manual Vacuum Forming Machine

1). Heater: (controlled separately) A. Heater separately Set different temperature according material forming demand to insure product quality. Adjusted the voltage of heater by AC voltage meter which can insures the heater temperature steady and save power. B. Change the heater units fleetly. And it is economical for maintain because it only need change part units.

2). Controlling the heater unit separately can short the heating time and economize energy and improve product quality and reduce cost.


3). Adjustable frame: The side size clamping can be adjusted as the working required.

ABS Thermoforming Machine, Manual Vacuum Forming Machine, Plastic Vacuum Forming Machines

Hangzhou Xiaoshan Wanfeng Mechanical & Electrical Equipment Factory , https://www.hfweldingmachinery.com