The machine for dedusting
*Also used in Chemical, Medical and other industries
1) Tangent air inlet design can first separate bigger dust particles to reduce the load of the filters.
2) High efficiency, particle < 1 um, efficiency > 95%; Particle > 1 um, efficiency > 99.5%
3) 2 or more filters can be controlled together as one unit.
4) The rising air pressure: 0.04~0.05MPa, normally using air blower.
5) High quality filter cloth ensures the de-dust efficiency and wear resistance
Working principle
The machine has a round body composed of three parts: upper body, middle body and lower body. Sleeve filters are fixed on the upper body and hung in the middle body. The dusty air is aspirated into the machine tangently from the inlet which is located on the middle body. After the dusty air enters the jet filter from the dusty air inlet, some large dust will fall down into the lower body. Air with small dust will be sticked on the sleeve while cleaned air will enter inside of the sleeve and come out from cleaned air outlet. With time going by, more and more dust will be sticked on the surface of the sleeve, when the resistance up to some extent, dust will be shaken off by high pressure air which is controlled by the pulse controller. There is one dust scraper in the lower body to collect all the dust and transfer the dust to the airlock discharger.
Â
Technical Parameter List | ||||||
Â
 Type
|
Sleeves length |
Sleeves Area |
Â
Air volume
|
Â
Power (kW)
|
Â
Weight
|
|
mm |
m2 |
m3/h |
Air lock |
Dust scraper |
kg |
|
Â
Â
TBLM-39
|
1800 |
25.7 |
4626-6168 |
1.1 |
1.5 |
1030 |
2000 |
28.7 |
5166-6888 |
1080 |
|||
2400 |
34.6 |
6228-8304 |
1120 |
|||
Â
Â
TBLM-52
|
1800 |
35.2 |
6336-8448 |
1230 |
||
2000 |
38.2 |
6876-9168 |
1288 |
|||
2400 |
46.1 |
8298-11064 |
1364 |
|||
Â
Â
TBLM-78
|
1800 |
51.5 |
9270-12360 |
1720 |
||
2000 |
57.3 |
10314-13752 |
1810 |
|||
2400 |
69.1 |
12438-16584 |
1893 |
|||
Â
Â
TBLM-104
|
1800 |
68.6 |
12348-16464 |
2200 |
||
2000 |
76.5 |
13770-18360 |
2560 |
|||
2400 |
92.1 |
16578-22104 |
2920 |
|||
Â
Â
TBLM-130
|
1800 |
88.2 |
15876-21168 |
2870 |
||
2000 |
98.9 |
17802-23736 |
3012 |
|||
2400 |
117.6 |
16578-22104 |
3160 |
|||
Â
Â
TBLM-168
|
1800 |
113.9 |
22788-30384 |
1.5x2 |
2.2 |
3540 |
2000 |
126.6 |
23802-31736 |
3721 |
|||
2400 |
151.9 |
27342-364566 |
3925 |
|||
Â
JHR series Activated Carbon Regeneration equipment is a series of equipment for activated carbon fire regeneration developed by Changchun Gold Research Institute Co., Ltd. in the 1990s and put on the market. After more than 30 years of application and continuous development, the series of equipment has been changed according to different heat sources. Three series of products are derived, the JHR-O series with diesel-flavored heat source, the JHR-A series with natural gas as the heat source, and the JHR-E series with electric energy as the heat source.
This series of equipment can regenerate various types of activated carbon such as coal, wood, nut shell, mineral (petroleum), or powder, granule, column, or primary, extruded, and re-formed activated carbon, according to the characteristics of activated carbon fire method regeneration treatment , This series of equipment is equipped with unique flue gas treatment equipment to ensure the green and environmental protection of the activated carbon fire method regeneration process.
Activated Carbon Regeneration Kiln,Kiln Furnace,Activated Carbon Regeneration,Elution Of Gold From Activated Carbon
Changchun Gold Research Institute Co.LTD , https://www.changchunmachine.com