The open type rescue boat is manufactured with compliance with the «amendments to the SALAS , 1974», MSC218. (82)MSC226. (82), MSC272. (85) and MSC274.(85).The hull of lifeboat is made of the fire reinforced plastic(F.R.P) .The space between the inside and outside hull is filled with polyurethane foam which will supply sufficient buoyancy for the boat. The boat will be afloat with the help of the foam even the part of boat underneath the water damaged . The boat will be self-righted when the boat turn over to any angle. This type of boat is used for the rescue on the sea.
Rescue boat is made from fiber reinforced plastic (FRP), between its inner hull and outer hull is filled with polyurethane foams to offer sufficient buoyancy. If damages occur to the boatbody under water, the buoyant hull can still provide sufficient buoyancy to enable the boat to sail safety on the water surface.
Teel handrails are installed on both sides of the boat for occupants. Self- discharging deck ensures quick discharge of water in the boat. rescue boat is equipped with self- right air- tank , which meets the requirements for use on board of the RORO vessel,which is according to the latest regulations of SOLAS and international standards to design and build.Â
 Rescue boat feature:
1. Comply with the requirmrns and rules of SOLAS and amendment 1996, LSA Code, MSC.218(82), MSC.272(85), MSC.320(89)& MSC.81(70) , MSC.226(82), MSC274(85), MSC321(89);
2. Boat body material: fire- pretended type FRP;
3. Fit the self-righting device. It can self-righting by itself when capsized;
4. Fit the off-load release mechanism with the safety pin;
5. Equipment is equipped according to SOLAS requirment;
6. The surface for walking is the antiskid;
7. Equip a manual pump remove the ponding in the boat;
8. Rubber fender is fitted around the boat;
9. The deck can self-motion drainage;
10. Running time of rescue boat when full-loaded & full-speed is more than 4 hours.
Life boat davit:
Â
| Name | Data |
| Length of Hull | 6.00m |
| Width of Hull | 2.30m |
| Depth of Hull | 0.87m |
| Occupants (82.5KG per person) | 7 Persons |
| Speed (3 persons ) | >20 Knots |
| Boat Weight(light)Include with engine,fuel and equipment | 1225KG |
| Boat Weight(fully loaded) | 1968KG |
| Power of gasoline outboard engine | 90HP |
| Diameter of Propeller | 300MM |
| Capacity of Fuel oil tank | 100L |
| Material of Propeller guard | SUS. |
Â
The rescue boat is fitted with oil-resistant foam fender with fastening rubber outside.
The handrails are arranged for each side of the boat for passenger embarkation.
The self-bailing deck design makes quick water exhaust.
The self-righting device is installed for fast rescue boat,
Which meet with requirement for use on board the RORO vessel.LSA code and MSC/CIR 809 regulation.
Product Range: We are specialized in all marine equipments and technique solution, that means we could offer you all marine equipments and accessories.
Product Design: We have big strong engineer team, for all marine products, we will design drawings according to ur requirements, or check the drawings you give us, all productions must be start after drawings confirmation.
Product Process: all produt flow are finished in our manufacture bases, so the quality and delivery timeÂ
could keep the same good, also avoid some details mistake.
Product Inspection: We have ISO certificate, and general products, we will provide Mill Certificate, also, weÂ
could provide ABS, BV, CCS, DNV, GL, LR, KR, NK, RINA, RS certificate, and we accept third party inspection, such as SGS etc. our clients also could come to visit our factor.
Any Inquiry or Questions, Please Kindly Contact Us!
Â
There are many grades of PVC. The viscosity or K value commonly used in the industry indicates the average molecular weight (or average degree of polymerization) of PVC, that is, the length of the PVC molecular chain, which determines the grade of the resin and the corresponding processing parameters. The molecular weight of the resin is related to the physical and mechanical properties of the product.
PVC Resin is a kind of non-crystalline linear polymer compound. The larger the relative molecular mass, the higher the viscosity, the higher the molecular weight, and the higher the tensile strength, impact strength, and elastic modulus of the product, but the flow of the resin melt Decline in sex and plasticity. The viscosity number is usually used to indicate the molecular weight of the polymer, and the polymer model is divided
PVC used to be the largest general-purpose plastic in the world, and it is widely used. It is widely used in construction materials, industrial products, daily necessities, floor leather, floor tiles, artificial leather, pipes, wires and cables, packaging films, bottles, foam materials, sealing materials, fibers, etc
SG3 (K-70, S1300): mostly used for soft products, hoses, wires and cables, films, shoe materials, toys, auto parts etc.
PVC RESIN SG3 has high purity, less fish eyes, easy to blister, high temperature resistance, insulation, soft product texture, etc. It is mainly used to produce soft products such as wires and cables, agricultural films, conveyor belts, and daily plastic products.
PVC RESIN SG3,Pvc Resin Sg3 Sg5 Sg8,Pvc Resin K70,Pvc Resin Powder Sg3,Suspension Pvc Resin Sg3
Henan Shunbang Chemical Industry CO.,Ltd , https://www.pvcresinchem.com