In the early morning of August 26th, an extraordinarily serious traffic accident occurred in Yan'an, and the hidden dangers of sleeper buses caused widespread concern. Yesterday, the Provincial Transportation Management Bureau held a video and telephone conference on vehicle safety management of the province's “two passengers and one crisis†(long-distance passenger transport, tourism passenger transport, and dangerous cargo transportation enterprises), and arranged the deployment of the recent road transport safety production management. Gansu Province requires that long-distance passenger vehicles must perform a rest system between 2 a.m. and 5 a.m., and it is recommended that a rest area be built along the freeway service area and passenger transportation site. For those lines that do not establish half-way breaks and cannot achieve grounded rest or connected transport, they will be resolutely shut down. A comprehensive inspection of the province's operating vehicle safety was conducted, and the GPS positioning device installed on the vehicle was inspected to ensure the normal use of the GPS positioning device.
A long-distance class line will be built along the rest area
Judging from the recent accidents, the quality of the driver, especially the driver’s safety awareness and emergency handling capability, is the most important aspect in preventing and reducing accidents.
It is understood that road management agencies at all levels will further improve driver training and examination systems and strengthen driving school management. Where a vehicle has a traffic accident with more than three deaths and has primary responsibility, it will cooperate with the safety supervision and public security departments to carry out a responsible review of the driver training, examination and certification process, and take training and examination records as the focus of the responsibility investigation. And basis. Gansu will strengthen the inspection of the qualifications of operating drivers, especially long-distance passenger transport, tourism passenger transport, and drivers of dangerous cargo transportation. All drivers who have not obtained legal qualifications will cease their business activities. In terms of reasonable scheduling, Gansu will implement long-distance buses from 2 to 5 a.m. to stop operation or implement connection transport, and strictly implement driver parking substitutions and landing rest systems to avoid fatigue driving. The education driver is forbidden to operate in the mountain road below the third level that cannot meet the safe traffic conditions at night. Gansu supports the establishment of a rest area at the expressway service area and passenger transportation station along the class line between 2 am and 5 pm. For those lines that do not establish a half-way rest point and cannot achieve grounded landing or connection for the driver, they will be resolutely shut down.
Initiate full-scale cleanup work at level 4
Yesterday, the Provincial Transport and Transportation Administration has initiated a comprehensive clean-up and thorough inspection of passenger stations, long-distance passenger transport, tourist passenger transport, and dangerous goods transport vehicles and lines at or above the four levels of its jurisdiction, focusing on the inspection of vehicle engines, fuel, circuit systems, and safety gates, and safety. Hammer and fire extinguisher to prevent vehicles from accidents due to oil leakage, electrical leakage and mechanical hidden dangers. Conduct special inspections on GPS dynamic monitoring of the “two passengers and one dangerous†vehicle in the province, focusing on checking the use of GPS, how it works, GPS monitoring records, "Two passengers and one dangerous" vehicle online rate, speeding and punishment records. The use of GPS satellite positioning monitoring methods to strengthen the daily supervision of affiliated long-distance passenger transport, tourism passenger transport, dangerous goods transport vehicles and drivers, to strengthen the monitoring of the vehicle outbound, speeding, overload, half-way parking and other states, and resolutely prevent vehicles from overtaking, speeding, The timely detection and suppression of all kinds of illegal and unlawful acts should be kept for at least 3 years for all kinds of illegal and irregular information and handling.
In addition, enterprises that do not have basic production safety conditions and have major potential safety problems will be ordered to suspend operations for rectification according to law, and rectification is still not up to the standard, and the corresponding scope of business is resolutely revoked. Strengthen the investigation and rectification of hidden dangers of transport companies, especially “two passengers and one crisis†vehicles, and impose severe penalties on violations such as overcrowding, speeding, failure to follow prescribed routes, shifts, outbound visitors, and violations of highways. .
Will exit the sleeper bus exit schedule
On December 31 last year, the Ministry of Industry and Information Technology and the Ministry of Public Security issued a joint document stipulating that since March 1 this year, the relevant sleeper buses will suspend production and sales, and public security agencies and traffic management departments will suspend registration and registration of sleeper buses. “Now all the people running on the road are registered. Since the beginning of March this year, they haven’t registered for registration of new sleeper buses.†According to the person in charge of the Provincial Transport Management Bureau, there are currently 800 registered sleeper buses in the province. More cars. The transportation management department requires that each vehicle be equipped with GPS and on-board monitoring.
According to Chen Yamin, Director of the Safety Supervision Division of the Provincial Department of Transport, the province will suspend the approval of passenger cars for sleeper buses, and conduct detailed investigations on the details of sleeper buses in the province in accordance with the relevant regulations, eliminating the timetable for exiting sleeper buses from the market.
A long-distance class line will be built along the rest area
Judging from the recent accidents, the quality of the driver, especially the driver’s safety awareness and emergency handling capability, is the most important aspect in preventing and reducing accidents.
It is understood that road management agencies at all levels will further improve driver training and examination systems and strengthen driving school management. Where a vehicle has a traffic accident with more than three deaths and has primary responsibility, it will cooperate with the safety supervision and public security departments to carry out a responsible review of the driver training, examination and certification process, and take training and examination records as the focus of the responsibility investigation. And basis. Gansu will strengthen the inspection of the qualifications of operating drivers, especially long-distance passenger transport, tourism passenger transport, and drivers of dangerous cargo transportation. All drivers who have not obtained legal qualifications will cease their business activities. In terms of reasonable scheduling, Gansu will implement long-distance buses from 2 to 5 a.m. to stop operation or implement connection transport, and strictly implement driver parking substitutions and landing rest systems to avoid fatigue driving. The education driver is forbidden to operate in the mountain road below the third level that cannot meet the safe traffic conditions at night. Gansu supports the establishment of a rest area at the expressway service area and passenger transportation station along the class line between 2 am and 5 pm. For those lines that do not establish a half-way rest point and cannot achieve grounded landing or connection for the driver, they will be resolutely shut down.
Initiate full-scale cleanup work at level 4
Yesterday, the Provincial Transport and Transportation Administration has initiated a comprehensive clean-up and thorough inspection of passenger stations, long-distance passenger transport, tourist passenger transport, and dangerous goods transport vehicles and lines at or above the four levels of its jurisdiction, focusing on the inspection of vehicle engines, fuel, circuit systems, and safety gates, and safety. Hammer and fire extinguisher to prevent vehicles from accidents due to oil leakage, electrical leakage and mechanical hidden dangers. Conduct special inspections on GPS dynamic monitoring of the “two passengers and one dangerous†vehicle in the province, focusing on checking the use of GPS, how it works, GPS monitoring records, "Two passengers and one dangerous" vehicle online rate, speeding and punishment records. The use of GPS satellite positioning monitoring methods to strengthen the daily supervision of affiliated long-distance passenger transport, tourism passenger transport, dangerous goods transport vehicles and drivers, to strengthen the monitoring of the vehicle outbound, speeding, overload, half-way parking and other states, and resolutely prevent vehicles from overtaking, speeding, The timely detection and suppression of all kinds of illegal and unlawful acts should be kept for at least 3 years for all kinds of illegal and irregular information and handling.
In addition, enterprises that do not have basic production safety conditions and have major potential safety problems will be ordered to suspend operations for rectification according to law, and rectification is still not up to the standard, and the corresponding scope of business is resolutely revoked. Strengthen the investigation and rectification of hidden dangers of transport companies, especially “two passengers and one crisis†vehicles, and impose severe penalties on violations such as overcrowding, speeding, failure to follow prescribed routes, shifts, outbound visitors, and violations of highways. .
Will exit the sleeper bus exit schedule
On December 31 last year, the Ministry of Industry and Information Technology and the Ministry of Public Security issued a joint document stipulating that since March 1 this year, the relevant sleeper buses will suspend production and sales, and public security agencies and traffic management departments will suspend registration and registration of sleeper buses. “Now all the people running on the road are registered. Since the beginning of March this year, they haven’t registered for registration of new sleeper buses.†According to the person in charge of the Provincial Transport Management Bureau, there are currently 800 registered sleeper buses in the province. More cars. The transportation management department requires that each vehicle be equipped with GPS and on-board monitoring.
According to Chen Yamin, Director of the Safety Supervision Division of the Provincial Department of Transport, the province will suspend the approval of passenger cars for sleeper buses, and conduct detailed investigations on the details of sleeper buses in the province in accordance with the relevant regulations, eliminating the timetable for exiting sleeper buses from the market.
Metal 3D Printing - Slm / Dmls
METAL 3D Printing - SLM / DMLS
The two technologies have many similarities: both use laser scanning and selectively fuse (or melt) metal powder particles, glue them together and build them layer by layer. Similarly, the materials used in both processes are granular metals.
The difference between SLM and DMLS is due to the basis (and patents) of the particle bonding process: SLM uses metal powder with a single melting temperature and completely melts the particles, while in DMLS, the powder is composed of materials with variable melting points at high temperatures Fusion at the molecular level.
Bering 3D provides 3D printing services for various metal materials such as stainless steel, die steel, titanium alloy, aluminum alloy, and bronze.
Metal 3D Printing - Slm / Dmls,3d Printing Service Metal ,Metal 3d Printing Service Stainless Steel,3d Printing Service Metal Aluminum
Ningbo Rongna Technology Co.,Ltd , https://www.prototyping-machining.com