On October 17, the Guangzhou Municipal Government's executive meeting reviewed and approved the “Guangzhou International Auto Parts Industry Base Construction and Implementation Plan†(hereinafter referred to as the “Projectâ€). The "Proposal" proposes that by 2020, it will strive to increase the output value of the auto parts industry base by 200 billion yuan and achieve a localization rate of key parts and components of 80%, forming a key zero for internal combustion-powered vehicles, new energy vehicles and intelligent network-linked vehicles. Components, industrial chain more complete industrial system.
Forward-looking layout? ? New Energy Vehicles and Intelligent Networking Auto Parts
At present, auto parts form three major agglomerations in the east, north and south. In the east, Huangpu and Zengcheng are the main lines, and more than 200 auto parts enterprises have been gathered around the entire vehicle industry. In the north, it mainly gathers more than 180 auto parts companies in and around Huadu Motor City. In the south, the company assembles more than 130 auto parts companies around Nansha Guangqi Toyota and Panyu Guangzhou Automobile Group's passenger car companies.
However, there is still a certain gap between the pillar position of the automobile manufacturing industry and the rapid development of the automobile service industry in the domestic fraternal cities. To this end, the “Proposal†proposes that, in addition to 2020, it will strive to increase the output value of auto parts industry base by 200 billion yuan, and achieve a localization rate of key components of 80%, and it also proposes that the auto parts export volume will reach 5 billion US dollars. In 2015, it doubled. Annual operating income exceeds 10 billion yuan in 4 auto parts companies, and 50 billion yuan in auto parts companies.
The "plan" clarifies that the Guangzhou International Auto Parts Industrial Base will be built in accordance with the "153" strategy (one base, five parks, and three key points) to create an international high-end auto parts manufacturing and export base and a national-level new energy auto parts industry. Agglomeration District and National Intelligent Networking Auto Parts Industry Cluster.
In accordance with the principle of differentiated development, based on existing industries, Panyu, Zengcheng, Huadu, Nansha, and Conghua will construct new industrial parks. In addition to the development of supporting parts and components around the traditional automotive vehicle companies, it also plans to lay out new energy vehicles and intelligent network-linked auto parts. At the same time, with the goal of combining manufacturing with services, we will build public facilities such as technology research and development, inspection and testing, industrial incubation, financial services, business logistics, and living facilities, and improve the functions of the base.
In addition to the development of the above-mentioned five major parks, we will gradually expand Zhaoqing City and Meizhou City's radiation area and select sites for Zhaoqing (Gaoyao) Auto Parts Industrial Park and Guangzhou (Meizhou) Industrial Transfer Industrial Park. Focus on the development of traditional auto parts and components, and undertake the transfer of parts and components for auto parts and components in the Pearl River Delta.
Fund support? ? The “Project†for the establishment of a multi-billion-dollar automotive industry innovation and development fund proposes to set up a Guangzhou-based auto industry innovation and development fund of more than RMB 10 billion to support the development of the Guangzhou automobile industry, and to support the development of self-owned brand automobiles, new energy vehicles, and intelligent network-linked vehicles. Among them, the proportion of investment in investment in Guangzhou auto parts enterprises is not less than 20%. At the same time, priority will be included in the Guangzhou International Automobile Parts Industrial Base included in provincial and municipal key construction projects, in the project approval, planning, approval for land use, etc. to give green channel support. For the newly introduced automobile parts manufacturing projects, rewards are based on 5% of the company's paid-in registered capital, and the maximum reward for each company is 50 million yuan. For the local backbone leading auto parts enterprise group that merges and acquires international automobile key parts and components companies and relocates the registered place to Guangzhou, an additional one-time reward of RMB 3 million will be provided.
The establishment of key parts R&D and manufacturing centers will be rewarded with 10% of the paid-in registered capital. The maximum reward for each center is 20 million yuan. For newly established auto parts and components companies with internal fission, 10% of the registered capital is paid, and each enterprise is rewarded with a maximum of 20 million yuan. For the previous year's R&D expenditures, the company adopts an incentive subsidy method and subsidizes the expenditure according to four criteria, up to 5% of the R&D expenditure.
For new or relocated to Guangzhou International Auto Parts Industry Base, with scale-based and innovative inspection and testing center, industry standard development center, science and technology innovation incubation center, automobile industry talent training organization, used car trading platform and other public technology service platforms Up to 30% of the paid-in registered capital is rewarded, and the highest award for each institution is 50 million yuan.
For the public service platform construction and supporting facilities construction projects of the park operation and management company, no more than 30% of the investment amount shall be subsidized or loan interest subsidy, and the amount of a single project shall not exceed 5 million yuan. The auto lifecycle big data management platform for industry associations and intermediary organizations to carry out social and public services shall be subsidized at 30% of the actual investment, up to a maximum of 3 million yuan. For enterprises in the park that use the park's public service platform, they are given a subsidy of 30% of their usage fees, and each enterprise has a maximum of 1 million yuan per year. For enterprises and organizations that are leading the development of national intelligent network-linked automobile standards and regulations or participating in the formulation of international intelligent network-linked automobile standards and regulations, a maximum of 800,000 yuan per project will be subsidized.
In addition, there are no less than 100 special indicators for the “talent green card†for the automotive and parts industries every year. Support qualified personnel to enjoy the city’s policy on talent funding, support awards, talent green cards, and housing security.
The
Hook Spanner Wrench, ER Spanner, SK Ball Spanner, Hook Lock Nut Wrenches.Wrench is a hand tool used to catch, tighten or turn bolts, nuts, screw heads, pipes or other objects. Also refers to the power tool has the same purpose.
Wrench is the use of leverage wrenching bolts, screws, nuts and other threaded fasteners hand tools. Wrench usually made one or both ends of the handle opening or aperture sets of clamping bolts or nuts. When applied to the use of the direction of rotation along the threaded shank force can wrenching bolts or nuts.
We are specializing in the production of ER Spanner, SK Ball Spanner,and manufacturing,
Collet Wrench,Hook Wrench Spanner,Spanner Wrench Tool,Cnc Spanner
JINING QINFENG MACHINERY HARDWARE CO.,LTD , https://www.qftoolholder.com