High-low temperature impact test box basket structure introduction High-low temperature impact test chamber is divided into two-box and three-box type, three-box type is composed of high temperature zone, low temperature zone, test zone, when the test zone is combined with high temperature zone, can do high temperature When the test, test area is combined with the low-temperature area, low-temperature test can be done. The two-chamber type is to drive the sample to move between the high temperature and low temperature area through the hanging basket to realize the high and low temperature conversion. In the following, we mainly analyze the structure of the basket of the two-chamber high-low temperature impact test box.
The upper part of the two-box high-temperature and low-temperature impact test box is a high-temperature test area, and the lower part is a low-temperature test area. The test sample is mounted on a hanging basket and is controlled by a cylinder to move up and down. When the high temperature test is performed, the three-position five-way solenoid valve is connected after the air source triplet adjusts the air pressure, the cylinder moves downwards axially, drives the basket to move upward, and the lower part of the basket is separated from the box body by the pulling force of the air cylinder. The plate is compacted to achieve a sealing effect. When the low temperature test is performed, the three-position and five-way solenoid valves are reversed, the cylinder moves axially, the basket descends from the gravity, and the basket is pressed by the gravity of the basket to achieve the sealing effect. The upper part of the cylinder is equipped with an inductor. The sensor can sense the position of the piston inside the cylinder, so that the position of the sensor can be adjusted. The distance of the cylinder shaft can be adjusted, and the basket can be adjusted to move downwards when the basket moves downwards. The pressure on the plate, and can prevent the rope from loosening.
The two-box high-low temperature impact test box basket moving device is driven by a cylinder and uses a cylinder, a wire rope, and a roller to pull the basket to perform a temperature impact test.
The cylinder is installed outside the high and low temperature zone. It is connected with the hanging basket through the wire rope. Only the common cylinder can be selected to drive the cylinder. The installation and replacement of the cylinder is very convenient. The upper and lower plates of the basket are equipped with silicone sealing strips and the silicone sealing strip is pulled through. After the rivets are coated with sealant, the sealing performance is good, and the installation and maintenance are convenient.
High Efficiency Three Dimensional Movement Mixer
The mixer machine widely used to mix all kinds of powder, such as spices, flour, granules, grains and so on. The mixing speed can be adjust according to customers' request.The mixing time can be seted. This machine can mix material evenly. There is no segregation or accumulation.The material can be SS304 or SS316L.When the Three Dimensional Movement Blender works, the mixer is provided with three-dimensional movement, and carries out revolution and rotation. The mixer has powerful turbulent action to accelerate material flowing and dispersing and makes turning and translational movement to conquer the impact of centrifugal force, so that gravity segregation and agglomeration will not occur in the materials, there is no dead corner, and even mixing is ensured.
The three Dimensional Movement Mixer is suitable for high evenness mixing of materials in such industries as chemical industry, medicine, battery, metallurgy, food and scientific research units.
â—With short mixing time and high efficiency, the effective loading rate of the vessel reaches 80%. (The rate of ordinary mixers is only 40%.)
â—The machine is low and does not have special requirements for plants, so that investment in basic construction is reduced.
â—The mixing barrel and machine body driving part can adopt partition installation to meet GMP requirements.
â—For the SYH-2 model mixer, mixing vessels of various shapes can be placed in the mixing barrel for mixing with convenient use.
â—Stepless speed adjustment can be realized to facilitate material loading and unloading.
â—It is featured by long service life and low noise.
â—Vacuum feeding and lifting machine feeding are available.
High Efficiency Three Dimensional Movement Mixer,Three Dimensional Movement Mixer,High Efficiency Dimensional Movement Mixer,Efficient Stereoscopic Motion Mixer, Three Dimensional Movement Blender
Jiangyin Jirui Machinery Manufacturing Co,LTD , https://www.jiruimachine.com