Model NO.: Y81-1250
Normal Force of Door Cover Cylinder: 300kn
Stroke of Door Cover Cylinder: 980mm
Trademark: Zhenhuan
Transport Package: Bare in Container
Specification: 1 pc 40′ container
Origin: China
Model NO.: Y81-1250
Normal Force of Door Cover Cylinder: 300kn
Stroke of Door Cover Cylinder: 980mm
Trademark: Zhenhuan
Transport Package: Bare in Container
Specification: 1 pc 40′ container
Origin: China
Hydraulic Metal Baler Y81-1250
Â
Â
I Description of this machine:
Y81 series of hydraulic metal balers are applicable in steel plants, recycling companies, ferrous & non-ferrous smelting industry to press metal scraps (steel, copper, aluminum, stainless steel, discarded automobiles) into acceptable fumace charges (shapes: cuboid; cylinder or octagon), so as to reduce cost of transportation, to increase speed of fumace charging.
II Main features:
1) Hydraulic drive for all machine types, manual valve control
2) No footing bolts needed in installation; diesel engine can be equipped for power.
3) Baling force : 125tons; productivity is 800-1500kgs per hour.
III Main technical data:
| 1 | Main oil cylinder | Model | YG250/160-450 | Qty. | 1pc | ||||
| Normal force | 1250KN | Stroke | 450mm | ||||||
| 2 | Side pressure cylinders | Model | YG220/160-900 | Qty. | 1pc | ||||
| Normal force | 1000KN | Stroke | 900mm | ||||||
| 3 | Turning bag cylinder | Model | YG110/70-370 | Qty. | 1pc | ||||
| Normal force | 50KN | Stroke | 370mm | ||||||
| 4 | Door cover Cylinder | Model | YG125/80-980 | Qty. | 1pc | ||||
| Normal force | 300KN | Stroke | 980mm | ||||||
| 5 | Size of Feed box | 1200×700×600mm | |||||||
| 6 | Size of Bale | 300×300mm or 250×250mm | |||||||
| 7 | Single cycle time | S |
~90 | ||||||
| 8 | Motor | Model | Y160L-4 | Rated power | 15KW | ||||
| Rated speed | 1440rpm | Qty. | 1set | ||||||
| 9 | Working pressure | 25MPa | |||||||
| 10 | Hydraulic pump | Model | 63YCY14-1B | Rated pressure | 31.5MPa | ||||
| Nominal displacement | 63ml/r | Qty. | 1pc | ||||||
| Â | Â | Â | Â | Â | Â | Â | Â | Â | Â |
4.1 High pressure oil pump: from Jiangsu, China
4.2 Motor: from Jiangsu, China
4.3 Low-voltage electrical components: Schneider
4.4 Limit switch: from Jiangsu, China
4.5 Cylinder seal: from Shenyang, China
4.6 Electro-hydraulic valve: from Jiangsu, China
4.7 Overflow valve: from Jiangsu, China
Hydraulic Metal Baler Y81-1250
Â
Â
I Description of this machine:
Y81 series of hydraulic metal balers are applicable in steel plants, recycling companies, ferrous & non-ferrous smelting industry to press metal scraps (steel, copper, aluminum, stainless steel, discarded automobiles) into acceptable fumace charges (shapes: cuboid; cylinder or octagon), so as to reduce cost of transportation, to increase speed of fumace charging.
II Main features:
1) Hydraulic drive for all machine types, manual valve control
2) No footing bolts needed in installation; diesel engine can be equipped for power.
3) Baling force : 125tons; productivity is 800-1500kgs per hour.
III Main technical data:
| 1 | Main oil cylinder | Model | YG250/160-450 | Qty. | 1pc | ||||
| Normal force | 1250KN | Stroke | 450mm | ||||||
| 2 | Side pressure cylinders | Model | YG220/160-900 | Qty. | 1pc | ||||
| Normal force | 1000KN | Stroke | 900mm | ||||||
| 3 | Turning bag cylinder | Model | YG110/70-370 | Qty. | 1pc | ||||
| Normal force | 50KN | Stroke | 370mm | ||||||
| 4 | Door cover Cylinder | Model | YG125/80-980 | Qty. | 1pc | ||||
| Normal force | 300KN | Stroke | 980mm | ||||||
| 5 | Size of Feed box | 1200×700×600mm | |||||||
| 6 | Size of Bale | 300×300mm or 250×250mm | |||||||
| 7 | Single cycle time | S |
~90 | ||||||
| 8 | Motor | Model | Y160L-4 | Rated power | 15KW | ||||
| Rated speed | 1440rpm | Qty. | 1set | ||||||
| 9 | Working pressure | 25MPa | |||||||
| 10 | Hydraulic pump | Model | 63YCY14-1B | Rated pressure | 31.5MPa | ||||
| Nominal displacement | 63ml/r | Qty. | 1pc | ||||||
| Â | Â | Â | Â | Â | Â | Â | Â | Â | Â |
4.1 High pressure oil pump: from Jiangsu, China
4.2 Motor: from Jiangsu, China
4.3 Low-voltage electrical components: Schneider
4.4 Limit switch: from Jiangsu, China
4.5 Cylinder seal: from Shenyang, China
4.6 Electro-hydraulic valve: from Jiangsu, China
4.7 Overflow valve: from Jiangsu, China
Melt blowing is also capable to produce drug-loaded fibers for controlled drug delivery The high throughput rate (extrusion feeding), solvent-free operation accompanied with the increased surface area of the product make melt blowing a promising new formulation technique.
Spinneret For Spinning Machine
Spinning Machine Spinneret,Customized Two-Hole Spandex Spinneret,Spinneret For Spinning Machine,Spinneret For Spinning Machine
Changzhou Jier Precision Machinery Manufacturing Co., Ltd. , https://www.jier-spinneret.com