Lifetime Service Decking Floor Sheet Profile Cold Roll Forming Machine

Decking Floor Sheet Profile Cold Roll Forming Machine

Product application:
The metal deck produced by floor deck forming machine ia used as decking of building; It has high strength with big wave length. It adheres well to concrete. Used on high building, it not only saves steel mold plate, but also reduces the weight of storey. With the same bearing capacity, it economized steel and cuts down investment accordingly.
 
Features:
1. The panel produced by this machine has high strength with big wave. It adheres well to concrete. It is used on high buildings. It not only saves steel mold plate, but also saves investment.

2. The deck floor panels forming by this machine is used for high building surface panels, it has so many good advantages, such as high wave, high strongness, high atuomation, low cost.

Machine Components
1.De-coiler: 5 ton passive 
Coil inner Diameter: ¢508-610mm   
Max out diameter of the coil: ¢1500mm
Expansion: with 4 palms, with brake
Max Coil Width: 1250mm
2.Cutting:hydraulic cutting
(1)    Cutting motion: The main machine automatically stops and then cutting. After the cutting, the main machine will automatically start. 
(2)    Material of blade: CR12with heat treatment 
(3)    Length measuring: Automatic length measuring 
(4)    Tolerance of length: +/- 1.5mm
(5)  Hydraulic Station Power: 4 KW
(6)    The cutting thickness: 0.75- 1.2mm
3.Control Box: Panasonic Brand
(1)    Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase (this is can depend on customer request)
(2)    Automatic length measurement:
(3)    Automatic quantity measurement
(4)    Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved 
(5)    Length inaccuracy can be amended easily. 
(6).    Control panel: Button-type switch and touch screen
(7)    Unit of length: millimeter (switched on the control panel)

Advantage
1).Take the EUROPEAN Quality Standard;
 
2). Choose the Best Material and Components.
 
3). Over 10-Year-Experienced Experts and Top International Sales to Care Your Needs.
 
4). Offer The Highest Quality but The Best Price in Prevailing Market.
 
5). Customize for You. Decking Floor Sheet Profile Cold Roll Forming Machine

Product application:
The metal deck produced by floor deck forming machine ia used as decking of building; It has high strength with big wave length. It adheres well to concrete. Used on high building, it not only saves steel mold plate, but also reduces the weight of storey. With the same bearing capacity, it economized steel and cuts down investment accordingly.
 
Features:
1. The panel produced by this machine has high strength with big wave. It adheres well to concrete. It is used on high buildings. It not only saves steel mold plate, but also saves investment.

2. The deck floor panels forming by this machine is used for high building surface panels, it has so many good advantages, such as high wave, high strongness, high atuomation, low cost.

Machine Components
1.De-coiler: 5 ton passive 
Coil inner Diameter: ¢508-610mm   
Max out diameter of the coil: ¢1500mm
Expansion: with 4 palms, with brake
Max Coil Width: 1250mm
2.Cutting:hydraulic cutting
(1)    Cutting motion: The main machine automatically stops and then cutting. After the cutting, the main machine will automatically start. 
(2)    Material of blade: CR12with heat treatment 
(3)    Length measuring: Automatic length measuring 
(4)    Tolerance of length: +/- 1.5mm
(5)  Hydraulic Station Power: 4 KW
(6)    The cutting thickness: 0.75- 1.2mm
3.Control Box: Panasonic Brand
(1)    Voltage, Frequency, Phase: 380 V, 50 Hz, 3Phase (this is can depend on customer request)
(2)    Automatic length measurement:
(3)    Automatic quantity measurement
(4)    Computer used to control length & quantity. Machine will automatically cut to length and stop when required quantity is achieved 
(5)    Length inaccuracy can be amended easily. 
(6).    Control panel: Button-type switch and touch screen
(7)    Unit of length: millimeter (switched on the control panel)

Advantage
1).Take the EUROPEAN Quality Standard;
 
2). Choose the Best Material and Components.
 
3). Over 10-Year-Experienced Experts and Top International Sales to Care Your Needs.
 
4). Offer The Highest Quality but The Best Price in Prevailing Market.
 
5). Customize for You.

Air Valve

Air valve

The new double-canisters exhaust valve consists of a big canister and a small one.

When there is no water in the pipe, the canister in the body drops down to the full opening place. When water coming in, the air in the body is released from the big canister, then water can be filled into the pine immediately. When there is no air in the pipe, water comes into the valve cavity and causes the two canisters rise up to the closing place. And the big canister stays closed so as to improve the capacity of transporting water and to economize energy.Since air is often dissolved into water, when transporting water, the air is released from water continuously , however, when reaching the quantity, the small canister will drop down with a small amount of air released from air vents . Otherwise the air accumulating on the top of the pipe will reduce the pipe system`s capability of transporting water.

When there is negative pressure in the pipe, the big canister drops down and the discharge hole is open. Then the valve takes in air in good time so that it can avoid affecting normal water supply due to the negative pressure on the pipe.

1.Unique design:

The two canisters are made of non-toxic engineering plastics of high strength., with concise structure, light weight, reliable and stable exhausting.

Inside and outside surfaces of the body, cover and dust-prevented cap are all coated with epoxy resin powder with no iron exposed. Materials of inner components are made of stainless steel and engineering plastics so as to prevent corrosion and to ensure purity of media.

The sealed seat, made of bronze, improves the ability of anti-abrasion, and prolongs service life.

2.Excellent anti-corrosion:

Inside and outside surfaces of the body, cover and dust-prevented cap are all coated with epoxy resin powder with no iron exposed

3.Sanitary standard:

Non-toxic epoxy resin powder used comply with sanitary standard GB/T 17219-1998.The coated resin is in accordance with standards of drinking water.

4.Tested summary:

The media is air. In the procedure of the test, the air temperature shall keep between 5℃ and 45℃. The fluctuation of air flowing value shall be within 4% and that of the pressure value within 5% while that of air temperature value within 2%.

Sealing test at a low pressure. When the pressure goes up to 0.05 Mpa, 0.1 Mpa, 0.2 Mpa, 0.3 Mpa, 0.4 Mpa, 0.5 Mpa, the valve maintains the pressure at 12mins with no visually detectable leakage of the sealed surface.

Repeated test of exhausting Putting water into the valve and discharging air every 8-9 seconds. Then increasing the pressure to 1.6 Mpa , keeping it for 2mins before releasing. Conducting leakage test for 250 times with the result that there is no visually detectable leakage and no structural damage. Then testing the sealing at a high as well as low pressure, no visually detectable leakage.

Repeated test of airing Injecting air into the valve till the valve closes fully, then cutting off the air till the valve open fully. Repeating leakage tests for about 25000 times with the consequence of no visually detectable leakage and no structural damage. Then testing the sealing at a high as well as low pressure, no visually detectable leakage.

Test of the valve's endurance The valve is poured by water with a pressure of 1.6 Mpa at a temperature of 50℃and maintaining it for five days, then checking whether the valve can be normally opened or not after releasing the pressure.Testing the leakage, resulting in no visually detectable leakage and no structural damage. Then testing the sealing at a high as well as low pressure, no visually detectable leakage.

Air Valve,Exhaust Valve,Air Release Valve,Air Valve With Single Orifice

SUZHOU YUEDA VALVE CO., LTD. , https://www.jsyuedavalve.com