Â
TRZ-2017Â automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
Â
Process:
Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing
Â
Main Parameter:
Power:49.2KW Â
Speed: 50/min
Size: 14000mm*6000mm*3800mm
Operator: 1
TRZ-2017 automatic conical paper tube reel is suitable for conical tubes of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, reeling, head cutting, the semi-finished paper tube will be sent to the dryer. It takes double speed variable frequency control technology. The reeling speed will be adjusted automatically. The whole process is eased by connecting with the dryer.
Main parameter:
For conical tubes with various taper and calibre.
Speed: 25-50/min
Power: 13.27kw
Size: 6080mm*2240mm*1500mm
TRZ-2017 after finishing part is designed to turn the semi-finished product into conical paper tube after V cutting, grinding, pressing, reversing and galling.
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and lower the waste rate. The after finishing machine can also be used individually.
Main parameter:
For conical tubes with various taper
Speed: 35-50/min
Air pressure: 0.3-0.4mpa
Size: 2600*1600*1580mm
The TRZ-2017 auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured Low consumption and high outcome. Paper tube can be feed and collected automatically after connecting with other equipment.
Main Parameter:
Speed: 25-50/min
Power: 10.1-24.5kw
Size: 5620mm*1700mm*3800mm
About us
  Shandong Tongri Power Science and Technology Co.,Ltd is a professional manufacturer for digit-control machine tool and paper-product equipment. In 1990, we began to manufacture textile bobbin and spiral paper tube with Hao Li Factory from Taiwan in the form of joint venture. In 1992 we developed semi-automatic conical and spiral paper tube production line which is sold throughout the whole country with our advanced technology, processing method, excellent product quality and high-level service.
  In 2006, we developed QZD-68 automatic conical paper tube production line after the absorption of German and South Korean technology. The new machine is coming with mechatronics to achieve low-labor, low-consumption, high-efficiency, high-quality paper tube production.
  In 2017, we developed all new automatic conical paper tube production line-TRZ-2017 after leaning from advanced experience and improving our current model. The efficiency has been improved to a whole new level.
  We have almost 30 years machinery manufacturing and processing experience.
  We have nearly 20 years paper tube and bobbin manufacturing experience.
  We'll provide you excellent package of paper tube production line and extensive experience.
Contact us
Mobile: +86 15098708888
Main product
Paper cone machine
Paper tube machine
Corrugated carton machine
Paper cone making machine
Fireworks paper cone machine
Textile paper cone machine
Parallel paper tube making machine
ZK-24 Gantry type drilling and tapping machine
High speed gantry type CNC drilling machine
CNC boring and milling machine
Intelligent production line
Manipulator
Robot
Â
Â
TRZ-2017Â automatic conical paper tube production line need no manual operation from raw paper to paper tube product. The whole production process is controlled by PLC programming, main engine transmission uses cam timing mechanism. All bearings of the machine adopt Japanese NSK bearings. Each position takes double speed variable frequency control technology. Also the none mechanical abrasion photoelectric control, approaching control and pneumatic delay control, which realize the mechanical and electrical integration. Suitable for the production of conical tube with various specification.
Â
Process:
Rolling---internal and external printing---edge grinding---cutting---Reeling---Drying---Finishing---cutting V-shaped opening---opening processing---pressing---grinding---galling---finishing
Â
Main Parameter:
Power:49.2KW Â
Speed: 50/min
Size: 14000mm*6000mm*3800mm
Operator: 1
TRZ-2017 automatic conical paper tube reel is suitable for conical tubes of various specification. After hanging the paper roll, internal and external printing, edge grinding, cutting, reeling, head cutting, the semi-finished paper tube will be sent to the dryer. It takes double speed variable frequency control technology. The reeling speed will be adjusted automatically. The whole process is eased by connecting with the dryer.
Main parameter:
For conical tubes with various taper and calibre.
Speed: 25-50/min
Power: 13.27kw
Size: 6080mm*2240mm*1500mm
TRZ-2017 after finishing part is designed to turn the semi-finished product into conical paper tube after V cutting, grinding, pressing, reversing and galling.
The speed can be adjusted freely with over-load protector and automatic stopping equipment when the improper operation happens to guarantee the safety and stability and lower the waste rate. The after finishing machine can also be used individually.
Main parameter:
For conical tubes with various taper
Speed: 35-50/min
Air pressure: 0.3-0.4mpa
Size: 2600*1600*1580mm
The TRZ-2017 auto-temperature control dryer uses chain-type circulation drying. After setting up the temperature, the heat can be controlled, maintained and adjusted freely, featured Low consumption and high outcome. Paper tube can be feed and collected automatically after connecting with other equipment.
Main Parameter:
Speed: 25-50/min
Power: 10.1-24.5kw
Size: 5620mm*1700mm*3800mm
About us
  Shandong Tongri Power Science and Technology Co.,Ltd is a professional manufacturer for digit-control machine tool and paper-product equipment. In 1990, we began to manufacture textile bobbin and spiral paper tube with Hao Li Factory from Taiwan in the form of joint venture. In 1992 we developed semi-automatic conical and spiral paper tube production line which is sold throughout the whole country with our advanced technology, processing method, excellent product quality and high-level service.
  In 2006, we developed QZD-68 automatic conical paper tube production line after the absorption of German and South Korean technology. The new machine is coming with mechatronics to achieve low-labor, low-consumption, high-efficiency, high-quality paper tube production.
  In 2017, we developed all new automatic conical paper tube production line-TRZ-2017 after leaning from advanced experience and improving our current model. The efficiency has been improved to a whole new level.
  We have almost 30 years machinery manufacturing and processing experience.
  We have nearly 20 years paper tube and bobbin manufacturing experience.
  We'll provide you excellent package of paper tube production line and extensive experience.
Contact us
Mobile: +86 15098708888
Main product
Paper cone machine
Paper tube machine
Corrugated carton machine
Paper cone making machine
Fireworks paper cone machine
Textile paper cone machine
Parallel paper tube making machine
ZK-24 Gantry type drilling and tapping machine
High speed gantry type CNC drilling machine
CNC boring and milling machine
Intelligent production line
Manipulator
Robot
Â
Tiltrotator testing is the process of evaluating the performance, functionality, and safety of a tiltrotator attachment used in construction equipment, such as excavators. A tiltrotator is a hydraulic attachment that allows the operator to rotate and tilt the bucket or other attachments, providing increased flexibility and efficiency in various construction tasks.
During tiltrotator testing, various aspects are assessed, including:
1. Rotation and tilt capabilities: The attachment's ability to rotate and tilt smoothly and accurately is evaluated. This involves testing the range of motion, speed, and precision of the tiltrotator.
2. Load capacity: The attachment's load-bearing capacity is tested to ensure it can handle the specified weight limits. This involves subjecting the tiltrotator to various loads and evaluating its performance under different conditions.
3. Hydraulic system performance: The hydraulic system responsible for controlling the tiltrotator's movements is tested for efficiency and reliability. This includes assessing the responsiveness of the hydraulic controls and evaluating any potential leaks or malfunctions.
4. Safety features: The tiltrotator's safety features, such as overload protection, emergency stop mechanisms, and locking mechanisms, are tested to ensure they function properly and provide adequate protection for the operator and surrounding personnel.
5. Durability and endurance: The attachment is subjected to rigorous testing to evaluate its durability and endurance under real-world construction conditions. This involves simulating various work scenarios and assessing the tiltrotator's ability to withstand wear, tear, and potential damage.
6. Compatibility and integration: Tiltrotators are designed to be compatible with specific excavators or other construction equipment. Testing involves verifying the attachment's compatibility with the designated machinery and assessing its integration and ease of installation.
Tiltrotator testing is crucial to ensure the attachment meets performance standards, adheres to safety regulations, and functions reliably in construction applications. It helps identify any design flaws, manufacturing defects, or operational issues that need to be addressed before the tiltrotator is used in the field.
An excavator attachment is a tool or accessory that can be attached to an excavator to enhance its functionality and performance. These attachments are designed to perform specific tasks and can be easily attached and detached from the excavator, depending on the job requirements. Some common excavator attachments include:
1. Bucket – used for digging and moving materials
2. Grapple – used for picking up and moving large objects
3. Auger – used for drilling holes
4. Hammer – used for breaking rocks and concrete
5. Ripper – used for breaking up hard soil or rock
6. Shears – used for cutting through metal or concrete
7. Tiltrotator – used for rotating and tilting the bucket for more precise digging
8. Thumb – used for gripping and holding objects
9. Rake – used for clearing and leveling land
10. Compactor – used for compacting soil or other materials.
Mini Excavator Attachments,Excavator Price,Excavator Attachments For Sale,Excavator Attachments
CATSU Hydraulic Machinery Equipment Co.,Ltd , https://www.tiltrotatorcat.com