Mining method
Dig a series of roadways from the ground to reach the ore body, in order to transport the ore that will be produced underground to the ground, while sending fresh air into the underground dirty air to discharge the surface, discharge the pit water to the surface, and send personnel, materials and equipment. Entering the ground and transporting the land to form an ascension,
A complete system of transportation, ventilation, drainage, and power supply is called mining.
Shaft development
When the ore body is assigned to the ground below, the ore body inclination angle is 45, or 15, and the deeper ore body is often used.
(1)) Development of the lower shaft
The shaft is drilled outside the rock movement belt of the ore body, and the stone gate reaches the vein. This method of mining the metal most widely used.
Advantages: The wellbore protection conditions are good, there is no need to leave a security pillar, and the ore body inclination angle is more than 75.
Disadvantages: The length of the stone gate increases as the depth of mining increases.
(2) Open up the shaft
The shaft is drilled outside the rock-moving belt on the ore body, and the Shimen Tongda ore body is drilled again. This method of development has serious shortcomings compared with the development of the lower shaft. Mainly in the upper stage, it is necessary to dig a long stone gate, which has a long infrastructure and a large investment in the initial stage of infrastructure construction.
(3) flank shaft development
The wellbore is placed on the side of the ore body. This method of development can only be one-way, and the speed of excavation is limited.
We equipped with advance automatic screen printing machine, inkjet screen making machine, autowashing & heatsetting machine which allow us to make the Flag size up to 2*6 meters with 7 colors. Our factory occupy the area of 3000 square meters, employ about 200 works,provide the production daily capacity for 12000 ~15000 square meters. To protect the environment,we also build the water recycling system according to the standard of national environment protection. With the reputation of products quality and creditability since settled, we have made the project of supplying flags for: the 10th national Games of china, the world table-tennis Championships, 2004 Athens Olympic games, 2008 Euro-Championships, 2008 Beijing Olympic Games and Vancouver 2010 White Olympic Games. As a leading manufactory certificated by ISO9001 in china,we are known as the best quality, the reasonable price, and the fastest delivery. Now our products already exported to all around world ,such as:Germany , Sweden , Switzerland, Belgium, Iceland ,Canada, Australia ,USA,UK,UAE,HongKong an Macao. We will always assure of you to provide the best quality and service. Welcome to contact us,for any question, in any time!
little pumpkin banner,pumpkin patch banner,pumpkin pie banner,welcome little pumpkin banner
FlagKing Flags Manufacturing Co.,Limited , https://www.cnflagking.com