Function and application area:
Lei Ao brand video surveillance multifunctional surge protector (network combo), used for network camera front-end equipment AC / DC power supply, network signal protection, which effectively absorb the energy shock generated by the surge, and through the grounding cable Energy is introduced into the earth. Select the corresponding product according to the operating voltage of the network camera. The multi-functional integrated design reduces the protection cost and installation difficulty, saves installation space, and greatly enhances the comprehensive protection effect of the camera.
Technical Parameters:
model
LA-IPC-12/24V
LA-IPC-220V
Power section
Rated operating voltage Un
12/24V
220V
Maximum continuous operating voltage Uc
18/30V
270V
Rated operating current IL
5A
Nominal discharge current In(8/20us)
5KA
The maximum discharge current Imax(8/20us)
10KA
Protection level Up
30V/75V
900V
Network section
Maximum continuous operating voltage Uc
Network: 8V
Rated operating current IL
300mA
Nominal discharge current In(8/20us)
5KA
The maximum discharge current Imax(8/20us)
10KA
Product specification
120×65×27mm
Protection level Up
15V
Maximum transmission rate Vs
100Mbps
Insertion loss
≤0.3dB
Response time tA
≤10ns
Working temperature T
-40~+85°C
Protective core
1, 2, 3, 6
Third, the wiring diagram
Fourth, installation instructions and precautions:
1. Before the surge protector string is connected to the protected equipment, the power must be turned off and no live operation is allowed.
2. It is installed in series between the lines of the equipment to be protected, the interface connection must be reliable, and the surge protector has the IN and OUT flags. The output is connected to the protected device. Do not reverse it. Otherwise, the surge protector will be damaged during lightning strike and the device will not be effectively protected (refer to the installation wiring diagram).
3. The grounding wire (PE) must be reliably connected to the ground of the surge protection system, and the shortest length is required to achieve the best protection effect.
4. When disconnecting the grounding wire, disconnect the device and avoid damaging the device due to the introduction of strong current such as electric welding from the ground end.
5. Connect the ground wire of the surge protector to the metal housing of the device to the ground collection bar.
6, surge protectors during use should be regularly tested, if there is a fault, it should be repaired or replaced in time to ensure the safety of the protected equipment.
7, non-professionals do not disassemble.
Foam Soap Dispenser
This product is very easy to use at home.
It is also available for washing hands.
Cixi Jinfeng Plastics Co.,Ltd, founded in 2000, is a private enterprise engaged in the production of plastic and metal items. With years of rapod developing, our products now fall into categories of Flashlight Tool Set, Tool Set , Hand Tool Set, Screwdrivers , gifts, flashlight, house ware, and etc...They are exported to countries and regions over the world, like USA, Europe, Australia, HK..., and enjoy reputations from the customers for the quality and timely delivery.
China leading manufacturers and suppliers of Foam Soap Dispenser,Hand Soap Dispenser, and we are specialize in Automatic Foam Soap Dispenser,Touchless Hand Sanitizer Dispenser, etc.
Foam Soap Dispenser,Hand Soap Dispenser,Automatic Foam Soap Dispenser,Touchless Hand Sanitizer Dispenser
Cixi Jinfeng Plastics Co.,Ltd , https://www.nbjftoolkit.com
