New energy high and low temperature test box
The test method for new energy high and low temperature test chambers can be environmental test equipment for performance testing of high temperature, low temperature or high and low temperature cycles. It is generally suitable for aviation, aerospace, electronics, electrician, automotive motorcycles, plastics, rubber and rubber products and other industries. Widely used in the new energy high and low temperature test equipment to simulate a variety of high and low temperature and harsh climate testing of various products, the thermal expansion and contraction of detailed data, has a considerable market.
New Energy High and Low Temperature Test Chambers
High-low temperature test equipment can be divided into alternating test chamber and damp heat test chamber accurately, and can be tested according to different test requirements. Of course, the test methods of these two test chambers are upgraded on the basis of high and low temperature. The alternating test chamber is a one-time setting of the temperature, humidity, and time that need to be done. It can be performed directly according to the program, and no manual operation is required. The humid heat test chamber is a system that humidifies and heats on the basis of temperature. When doing temperature detection, it can also do humidity test at the same time. The two-in-one method is closer to life and simulates more severe environmental effects.
The alternating test box and the damp heat test box have no effect under normal tests, but if it is necessary to perform both temperature and humidity tests, the damp heat test box must be used. However, these two methods are also avoided during the test. No failure, we want to avoid this kind of thing we should do before the test to do a "systemic inspection" of the test box.
New energy high and low temperature test chamber features
1. During the heating process in the new energy high and low temperature test chamber, as a relatively simple process in the entire temperature change, the temperature is increased by its electric heating method, and the temperature of the high and low temperature test chamber is increased to the most standard. In the standard value, and for the simultaneous warming speed also within its allowable range, which can not be raised too fast or too slow;
2. In its constant high temperature state, when its temperature reaches the set temperature, the temperature of its test chamber should be maintained within this range until it reaches the set constant temperature;
3. In the cooling process, as a relatively complex process of relatively warming, and mainly through the compressor to cool down, so that when its temperature is maintained for some time, it will bring its temperature to a certain standard At the same time, the rate of cooling should be within the specified time;
4. For a constant low-temperature condition, when the temperature drops to a low temperature for a constant period of time, it should be noted that the entire process should be completed within 24 hours before it can be completed.
5. The accuracy of the test results can be affected by the setting of the temperature change condition and the determination of the temperature range during the test. In the above temperature control, choose the appropriate test method and make a good test.
New energy high and low temperature test box manufacturers
Dongguan City Cowan test equipment limited company specializing in the production of new energy high and low temperature test chamber, temperature and humidity chamber, thermal shock chambers, rain chamber, can test new energy equipment development and production of programmable high and low temperature test boxes, Kewen has 12 years of experience in R&D and production.
1. High quality imported Compressor energy saving and low noise.Compressor brand Embraco and Danfoss is available for customers to choose.
2. Toughened heated glass, anti condensation and energy saving and good visual effect.
3. LED light in illumination, avoiding glaring.
4. Independent electronic board and cooling system, can be easily taken out for maintenance or replacement.
5. Environment-friendly CFC-free Refrigerant R134a or R404a.
Cake Cabinet,Small Display Cabinet,Cake Display Cabinet,Cake Glass Display Cabinet
ShanDong XiMaiD Commercial electrical appliance Co. LTD , https://www.shandongximaide.com