In order to produce the most wear-resistant and impact-resistant hammerhead, the material of the hammerhead should be integrated with hardness and toughness, so it is difficult to choose a material that has both hardness and toughness to make the hammerhead. Conventional hammer hammer crusher in the production of high-manganese steel will choose as a starting material, it is inexpensive, good technology, high toughness, but the hardness is not; in the course of a very short life, will not take long, it Replace it as soon as possible. High-chromium alloys are also used to make the hammer, its hardness is very strong, but not achieve toughness.
According to the analysis of the two, the technicians found that if they can combine the two and give full play to their advantages and weaken their shortcomings, can they also achieve twice the result with half the effort? With such questions, after many trials Developed the latest high-chromium alloy composite hammerhead, which not only solves the problem of high hammer loss and low wear resistance in the past, but also greatly improves the service life of the hammerhead. Due to the complicated processing technology and the high technical requirements, the composite hammerhead is based on the most advanced processing technology and technology at home and abroad to complete each production detail.
Deburring Constant Force Actuator
Our deburring Constant Force Actuator, deburring Force Control System, or deburring active contact flange have many advantages over other grinders. It can realize flexible grinding, quick repsond to surface changing, and instant adjusting. Traditional mechanic hand lacks flexibility, and it is not easy to adjust, hard to realize mass production.
Deburring constant force actuator,Deburring active contact flange,Deburring force control system
DARU Technology (Suzhou) Co., Ltd. , https://www.szforcecontrolsystem.com