Model NO.: DFC-600
Application: Various Soft and Hard Rock, Water Well Drilling Ri
Diesel Engine Power: 191kw
Accessory: We Provide Factory Cost Accessory
Certificate: BV & SGS Certificate
Mud Pump: 3nb-130
Trademark: DEFY
Specification: BV&SGS&ISO
Origin: China, Henan
Model NO.: DFC-600
Application: Various Soft and Hard Rock, Water Well Drilling Ri
Diesel Engine Power: 191kw
Accessory: We Provide Factory Cost Accessory
Certificate: BV & SGS Certificate
Mud Pump: 3nb-130
Trademark: DEFY
Specification: BV&SGS&ISO
Origin: China, Henan
We have some models of truck mounted water well drilling rig for your choice according to your drilling requirements, such as DFC-200, DFC-350A, DFC-400B, DFC-600 etc. DFC-600 Truck Mounted Drilling Rig
Â
Main features:
1. DFC-600 truck mounted drilling rig is designed by our engineers. It is a kind of truck mounted and rotaryÂ
drilling rig.
2. The truck chassis adopts the 8*6 special crane chassis of brand CHANA TRUCK and the main driveÂ
system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower,Â
feed mechanism are set up on the chassis.
3. This rig is a rotary drilling rig with directional circulation. It is equipped with 3NB-130 mud pump whichÂ
adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
4. The power of drilling rig comes from the truck engine; the rig has distribute implement and hydraulicÂ
system.
5. We can install the spare electric engine and clutch implement according to client's requirement,Â
so that the rig can work with diesel engine or electric engine.
6. We set up a generator (MF) which is convenient to illuminate or work at night.
There are pressure device on the rig so it is high efficiency when the rig drill on mud rock and on theÂ
weathering formation.
7. The main drive of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled.Â
Transfer case and mud pump clutch system are air operated.
 8. According to client's requirement, the rig can carry out down-the-hole hammer drilling with USA Sullair,Â
Japan PDSKIOOS, Sweden Atlas, China Kaishan, Hongwuhuang; can carry out air lifting reverseÂ
circulation drilling with air-water tap, double-wall drilling pipe, gas-water separator;Â
can carry out Hydraulic DTH hammer drilling rock breaking with WB1200/12 mud pump;Â
can carry out core-drilling with other special drilling tools.
| Technical parameter | |||
|  Drilling depth(M) | 600 | ||
|  Drilling diameter(mm) | 500 | ||
|  Speed of turntable(r/min) | 117;102;60;38;22;13;16(reverse) | ||
|  Torque of turntable(KN.m) | 5.4----50 | ||
| Single rope lifting capacity of main windlass(KN) | 50 | ||
| Maximum lifting capacity of main windlass(KN) | 300 | ||
| Single rope lifting capacity of assistant windlass(KN) | 60 | ||
| Maximum lifting capacity of assistant windlass(KN) | 240 | ||
|  The lifting capacity of hook(KN) | 300 | ||
|  Bearing capacity of drilling tower (KN) | 300 | ||
|  The height of drilling tower (mm) | 15000 | ||
| Drill pipe |  Kelly bar(mm) | 108×108×10500 | |
|  Assistant pipe (mm) | .89×10×9000 | ||
| 3NB-130 plunger pump  |
 Stroke of piston (mm) | 140 | |
| Theoretical flow (L / min) | 1000 | ||
| Rated pressure (Mpa) | 5 | ||
|  Diameter of suction tube (mm) | 120 | ||
|  Diameter of drain pipe (mm) | 64 | ||
|  Input power (kw) | 95 | ||
|    Truck chassis |
 Drive form | 8×6 | |
| Â Engine |
 Model | YC6A260-33YC water -cooled four strok diesel engine | |
|  Rated power(KW) | 191 | ||
|  Speed (r/min) | 2300 | ||
|  Size (L*W*H)(mm) | 11510*2480*2800 | ||
|  The highest speed(Km/h) | 75 | ||
|  Weight (kg) | 27500 | ||
|  Transport size(L*W*H)(mm) | 15943×2480×4032 | ||
|  Working size(L*W*H)(mm) | 11539×2480×16749 | ||
 Please contact Andrew for more details and best offer
Phone: 0086-18681448031
Website: www.zzdefydrillrig.com, Â www.cndrillingrigmachine.com
Facebook: www.facebook.com/cndrillingrigs We have some models of truck mounted water well drilling rig for your choice according to your drilling requirements, such as DFC-200, DFC-350A, DFC-400B, DFC-600 etc.Â
DFC-600 Truck Mounted Drilling Rig
Â
Main features:
1. DFC-600 truck mounted drilling rig is designed by our engineers. It is a kind of truck mounted and rotaryÂ
drilling rig.
2. The truck chassis adopts the 8*6 special crane chassis of brand CHANA TRUCK and the main driveÂ
system, the transfer case, gearbox, double-winch unit, mud pump, turntable, drilling tower,Â
feed mechanism are set up on the chassis.
3. This rig is a rotary drilling rig with directional circulation. It is equipped with 3NB-130 mud pump whichÂ
adopts the slurry as the washing fluid and can drill on clay, sand and rock if it is equipped with suitable drilling bit.
4. The power of drilling rig comes from the truck engine; the rig has distribute implement and hydraulicÂ
system.
5. We can install the spare electric engine and clutch implement according to client's requirement,Â
so that the rig can work with diesel engine or electric engine.
6. We set up a generator (MF) which is convenient to illuminate or work at night.
There are pressure device on the rig so it is high efficiency when the rig drill on mud rock and on theÂ
weathering formation.
7. The main drive of rig is mechanical and the four landing legs and drilling tower are hydraulic controlled.Â
Transfer case and mud pump clutch system are air operated.
 8. According to client's requirement, the rig can carry out down-the-hole hammer drilling with USA Sullair,Â
Japan PDSKIOOS, Sweden Atlas, China Kaishan, Hongwuhuang; can carry out air lifting reverseÂ
circulation drilling with air-water tap, double-wall drilling pipe, gas-water separator;Â
can carry out Hydraulic DTH hammer drilling rock breaking with WB1200/12 mud pump;Â
can carry out core-drilling with other special drilling tools.
| Technical parameter | |||
|  Drilling depth(M) | 600 | ||
|  Drilling diameter(mm) | 500 | ||
|  Speed of turntable(r/min) | 117;102;60;38;22;13;16(reverse) | ||
|  Torque of turntable(KN.m) | 5.4----50 | ||
| Single rope lifting capacity of main windlass(KN) | 50 | ||
| Maximum lifting capacity of main windlass(KN) | 300 | ||
| Single rope lifting capacity of assistant windlass(KN) | 60 | ||
| Maximum lifting capacity of assistant windlass(KN) | 240 | ||
|  The lifting capacity of hook(KN) | 300 | ||
|  Bearing capacity of drilling tower (KN) | 300 | ||
|  The height of drilling tower (mm) | 15000 | ||
| Drill pipe |  Kelly bar(mm) | 108×108×10500 | |
|  Assistant pipe (mm) | .89×10×9000 | ||
| 3NB-130 plunger pump  |
 Stroke of piston (mm) | 140 | |
| Theoretical flow (L / min) | 1000 | ||
| Rated pressure (Mpa) | 5 | ||
|  Diameter of suction tube (mm) | 120 | ||
|  Diameter of drain pipe (mm) | 64 | ||
|  Input power (kw) | 95 | ||
|    Truck chassis |
 Drive form | 8×6 | |
| Â Engine |
 Model | YC6A260-33YC water -cooled four strok diesel engine | |
|  Rated power(KW) | 191 | ||
|  Speed (r/min) | 2300 | ||
|  Size (L*W*H)(mm) | 11510*2480*2800 | ||
|  The highest speed(Km/h) | 75 | ||
|  Weight (kg) | 27500 | ||
|  Transport size(L*W*H)(mm) | 15943×2480×4032 | ||
|  Working size(L*W*H)(mm) | 11539×2480×16749 | ||
 Please contact Andrew for more details and best offer
Phone: 0086-18681448031
Website: www.zzdefydrillrig.com, Â www.cndrillingrigmachine.com
Facebook: www.facebook.com/cndrillingrigs
A plastic packaging tube is a cylindrical container made of plastic materials such as polyethylene, polypropylene, or PVC. It is commonly used for packaging products such as toothpaste, cosmetics, pharmaceuticals, and food. The tube is sealed at one end and has a cap or closure at the other end to allow for easy dispensing and storage of the product. The plastic packaging tube offers several advantages such as being lightweight, durable, and cost-effective. It also provides protection against moisture, light, and air, which helps in preserving the quality and shelf life of the product. Additionally, plastic packaging tubes are customizable, allowing for branding and product differentiation. However, plastic packaging tubes are also a significant contributor to plastic waste, and efforts are being made to reduce their environmental impact through recycling and the use of eco-friendly materials.
Suzhou Sanxin Tube Co.,Ltd. , https://www.zjpackagingest.com