2010 annual monitoring: the passing rate of car navigation systems is less than 50%

In recent years, more and more consumers have purchased private cars, but at the same time, there have been more complaints about car consumption. In 2010, the Jiangsu Provincial Administration for Industry and Commerce carried out quality inspections on 661 batches of auto parts in the province's circulation field, which qualified 408 batches and 253 batches that were unqualified, with a pass rate of only 61.7%. Yesterday, the provincial bureau of industry and commerce announced the testing situation and disclosed some serious unqualified parts list.

Yu Chunxia, ​​deputy director of the Consumer Protection Branch of the Provincial Administration for Industry and Commerce, introduced that although the test results showed that the passing rate of auto parts was only 61.7%, it mainly focused on issues such as signage, insufficient dimensional accuracy, surface defects, and certain functional indicators. The quality qualification rate of performance indicators related to human health, life, and property safety is relatively high, such as the friction coefficient and shear strength of brake pads, and the minimum burst pressure of rubber hoses, indicating the quality of auto parts in circulation in Jiangsu Province. The safety index is better.

According to the results of the quality monitoring of auto parts products in circulation in the province in 2010, there are fewer auto parts accessories in the auto parts market; the inferior goods are more often used, and some quick repair plants use low-quality zeros. Accessories; there are also some products produced by enterprises with production licenses also have quality non-compliance.

Plastic Agglomerator

Plastic Agglomerator is widely used for film or fiber recycling, it used for recycling machine industry, it can recycle PET flakes,LDPE,LLDPE,HDPE, PE, PP film and woven bags . It can also used for plastic PE PP recycling granulator line.

When the waste plastic is supplied into the chamber of such machine, it will be cut into smaller chips due to the crushing
function of the rotating knife and fixed knife. During the crushing processing, the material that soaked up lots heat from the frictional movement of material being crushing and the wall of container will be going to become semi-plasticizing state. The particles will stick with each other due to the function of plasticization. Before it sticks each other completely, the cold water pre-prepared is sprayed into the material being crushed. The water will be evaporated off quickly and the surface temperature of material being crushed drop down quickly also. So the material being crushed will become small particles or granules. It is easy to recognize the particles by different size and can be colored by using of color agent being putted into the container during the crushing processing.

Plastic Agglomerator,plastic agglomerate,Plastic Agglomerator Machine,Plastic Pelletizer

zhangjiagang sevenstars machinery co.,ltd , https://www.sevenstarmachienry.com