Model NO.: DRLSDSHWC-3
Thread Type: "C"(for Machine Screw)
Point Type: #3 Tek Point (#4 ~ #7 Also Available)
Application: Metal Sheet, Steel Structure
Length: 1/2′′ ~ 16", 13 ~ 400mm
OEM/ODM: Available
Trademark: Drolee
Transport Package: Bulk
Specification: #12, 1/4", 5.5mm, 6.3mm
Origin: China
HS Code: 7318140090
Model NO.: DRLSDSHWC-3
Thread Type: "C"(for Machine Screw)
Point Type: #3 Tek Point (#4 ~ #7 Also Available)
Application: Metal Sheet, Steel Structure
Length: 1/2′′ ~ 16", 13 ~ 400mm
OEM/ODM: Available
Trademark: Drolee
Transport Package: Bulk
Specification: #12, 1/4", 5.5mm, 6.3mm
Origin: China
HS Code: 7318140090
410 Stainless Steel Passivated Hex Washer Head Self-drilling Screw for Metal, Type "C" Machine ThreadSelf drilling screws have a drilling tek point. Flat heads are countersunk (cone shaped under the head) with a flat top. Phillips drive is installed with a phillips screw driver.
The self-drilling screws are made of stainless steel and have a fine machine screw thread with a self-drilling cutting point to pierce through metal steel, aluminium,etc., including structural steel easily and tightly.
The higher the TEK number the larger the drilling point to pierce heavier gauge metals. Different stainless mode for different applications.
Specification
Â
Type | Self Drilling Screw /Â Tek Screw |
Grade | SS410 |
Head Type | Hex Washer |
Drive Type | #3 Tek Point (#4 ~Â #7 also available) |
Diameter | #12, 1/4", 5.5mm, 6.3mm |
Length | 1" ~Â 16", 25.0 ~Â 250mm |
Standard | DIN, ANSI |
OEM/ODM | Available |
Stock | Unavailable |
Contact
If you're insterested in our stainless steel hex self drilling screw for metal , please do not hesitate to send us an email or call us at +8615867456779(Mobile) directly.
For stock, we suggest you double check from us before placing order, thank you!
 410 Stainless Steel Passivated Hex Washer Head Self-drilling Screw for Metal, Type "C" Machine Thread
Self drilling screws have a drilling tek point. Flat heads are countersunk (cone shaped under the head) with a flat top. Phillips drive is installed with a phillips screw driver.
The self-drilling screws are made of stainless steel and have a fine machine screw thread with a self-drilling cutting point to pierce through metal steel, aluminium,etc., including structural steel easily and tightly.
The higher the TEK number the larger the drilling point to pierce heavier gauge metals. Different stainless mode for different applications.
Specification
Â
Type | Self Drilling Screw /Â Tek Screw |
Grade | SS410 |
Head Type | Hex Washer |
Drive Type | #3 Tek Point (#4 ~Â #7 also available) |
Diameter | #12, 1/4", 5.5mm, 6.3mm |
Length | 1" ~Â 16", 25.0 ~Â 250mm |
Standard | DIN, ANSI |
OEM/ODM | Available |
Stock | Unavailable |
Contact
If you're insterested in our stainless steel hex self drilling screw for metal , please do not hesitate to send us an email or call us at +8615867456779(Mobile) directly.
For stock, we suggest you double check from us before placing order, thank you!
Â
Minimum capacity not less than 300g, maximum not more than 2kg.
portable pocket scale,jewelry scale,electronic scale
Shenzhen Big Dipper Scale Co.,Ltd , https://www.bds-balance.com