Dynamic Weight Check Machine (CWC-300NS)SERIES
Weighing Rangesorting speedAccuracy
10-999g50bags/min± 0.5g
1000-1999g40bags/min± 1.0g
2000-3000g30bags/min± 2.0g
SPECIFICATIONS
Power Supply: AC110V/220V 50-60Hz
Rated Output: Appr. 200W
Dimension: 1550mm(L)*641mm(W)*1360+/35mm(H)
Weight: 74kg + 50kg
Measurement: Strain Guage
Regection: Air Jet/Flapper/Falling Drop
Operation: Touch Screen
Alarm: Buzzzer & Lamp
Belt speed: Max. 65m/min
REJECTOR: Air jet, flipper type, falling drop
FEATURES
Strong stainless steel structure; Water proof design.
High accurate loadcell; Based on advanced DSP technology.
Automatic weighing compensation and zero tracking.
100 products preset; Easy to edit and recall.
Quickly product shift and speed recall.
2000 sorting records; Printer output ready.
Touch screen; Friendly operation interface.
Dynamic Weight Check Machine (CWC-300NS)SERIES
Weighing Rangesorting speedAccuracy
10-999g50bags/min± 0.5g
1000-1999g40bags/min± 1.0g
2000-3000g30bags/min± 2.0g
SPECIFICATIONS
Power Supply: AC110V/220V 50-60Hz
Rated Output: Appr. 200W
Dimension: 1550mm(L)*641mm(W)*1360+/35mm(H)
Weight: 74kg + 50kg
Measurement: Strain Guage
Regection: Air Jet/Flapper/Falling Drop
Operation: Touch Screen
Alarm: Buzzzer & Lamp
Belt speed: Max. 65m/min
REJECTOR: Air jet, flipper type, falling drop
FEATURES
Strong stainless steel structure; Water proof design.
High accurate loadcell; Based on advanced DSP technology.
Automatic weighing compensation and zero tracking.
100 products preset; Easy to edit and recall.
Quickly product shift and speed recall.
2000 sorting records; Printer output ready.
Touch screen; Friendly operation interface.
Architectural Hardware Precision Casting or architectural hardware investment casting, silica sol process. It is a casting process with little or no cutting.
Cast architectural hardware is an excellent process technology in the foundry industry. Its application is very extensive. Architectural hardware cast not only applies to the casting of various types and alloys, but also produces the dimensional accuracy of castings. The surface quality is higher than that of other casting methods, and even castings that are difficult to cast and which are difficult to cast have high temperature resistance and are not easily processed can be cast using investment casting.
In wax pattern process,we mix stearic acid and paraffin wax in wax pattern making,as you know,it is better than polyethylene,and the wax deformation is small.
In shell making,we adopt automatic sand-covering production line, which was invented under the guidance of our general manager.The indoor temperature was controlled by air-conditions,keeping the temperature at 24℃±1℃, which can make the castings much more stable,the internal tissues much more well-proportioned.
In shell hardening process,we use aluminium chloride to harden the shell.This can make the shell so hard that it can`t be distorted,at the same time the bug which the casting may have will be decreased.If there are letters or numbers in it,they will be much clearer.
In dewaxing process,about 95% of the castings suppliers adopt the original water dewaxing technics,but we using the advanced steam dewaxing technics,which we are very proud of. This can effectively avoid the air-hole and sand-hole, making the casting look much nicer.
In smelt process, we use middle frequency furnace, avoiding the emergence of the oxide; in molten steel control part, we use Germany-imported direct reading spectrometer machine, assuring its quality before the molten steel out of the furnace. During this process we use ERP production and management software to get the feedback information.
In shell-knock out process, we have special machines,which can decrease the hitting and knocking, easily made by manual shell knocking out.
In shot-blasting process, we have crawler-type and hanging shot-blasting machine, with steel shot 0.5-0.8, making the products smooth.Of course, if the customer wants it look much nicer, we also can carry out sand-blast treatment.
In heat treatment process, we use electric furnace, and adopt double-temperature control in order to heat the products equally. As a result, the products will have great metallurgical structure.
Our tolerance can reach at the grade of 5-7 according to our country`s tolerance standard.
In machining process,we have 12 CNC machining centers and some other machines, so we can make further machining if the customers need.
Architectural Hardware Precision Casting
Architectural Hardware Precision Casting,Architectural Hardware Lost Wax Casts,Architectural Hardware Investment Casting,Investment Casting for Architectural Hardware
Wei fang junlong precision casting Co.,Ltd , https://www.junlongcasting.com