SD-5143
Specifications:Â
Throat Diameter: | Â 1 in (25mm) |
Mounting Type: | Screw on 1 3/8″ |
Nominal Impedance: | 8 Ohm |
Power Capacity: | 60Watts RMS(pink noise signal -12db/OCT) |
Sensitivity(1W/1M): | 109dB |
Frequency Range: | 1.2kHz-20kHz |
Diaphragm Material: | Titanium |
Voice Coil Diameter | 2.03 in(51.6mm) |
Voice Coil Material | Round Aluminium Wire |
Flux Density: | 1.75T |
Magnet: | Â Strontium Ferrite |
outer diameter: | φ134mm |


Our Competitive Advantages
Well and High Quality Control ,
Prompt Delivery ,
Competitive Prices ,
Small Order Acceptable ,
OEM Order are acceptable. Driver unit titanium speaker tweeter
SD-5143
Specifications:Â
Throat Diameter: | Â 1 in (25mm) |
Mounting Type: | Screw on 1 3/8″ |
Nominal Impedance: | 8 Ohm |
Power Capacity: | 60Watts RMS(pink noise signal -12db/OCT) |
Sensitivity(1W/1M): | 109dB |
Frequency Range: | 1.2kHz-20kHz |
Diaphragm Material: | Titanium |
Voice Coil Diameter | 2.03 in(51.6mm) |
Voice Coil Material | Round Aluminium Wire |
Flux Density: | 1.75T |
Magnet: | Â Strontium Ferrite |
outer diameter: | φ134mm |


Our Competitive Advantages
Well and High Quality Control ,
Prompt Delivery ,
Competitive Prices ,
Small Order Acceptable ,
OEM Order are acceptable.
Voltage:380V -50Hz
Power:37KW
Measurement:L2100×W2000×H2200
Weight:2.8t
Output:400KG/hour.
Please clear up iron from the mixed cables, infeed according to the crusher `s capacity.The crusher will chop the scrap wires into granules.
if any abnormal noise,please stop and open the crusher , inspecting or changing screen,if any part run hot,please stop it and inspect.
Matters needing attention:
*Please inspect all the plants before working and after working, inspect whether the belts/nuts to become loosened or disengaged,add lubricating oil to bearing block.
*please wear mask, gloves on working time.
*Never put your hands into the shield when the machine working,keep child away from the machine.
Copper Wire Granulator, Cable Grinding Machine
TAIZHOU GUANGLONG WIRE STRIPPING MACHINE MANUFACTURING CO.,LTD , https://www.scrap-wire-stripper.com