 Insertion Type Thermal Gas Mass Flow Meter
A.[Features of thermal mass flowmeter]
Convenient and accurately measuring
The thermal mass flowmeter can measure the gas flow rate without temperature and pressure consumption;
Large ratio of measuring range
The Hot Sale And Loner Warranty Period Nitrogen Gas Flow meter could measure gas with velocity of flow from 100Nm/s to 0.5Nm/sÂ
Good performance and longer working life
The digital thermal mass flow meter with good anti-seismic performance and longer working life,the transmitter don't cantain movable part and pressure sensor,
High Qulaity Material
The Hot Sale And Loner Warranty Period Nitrogen Gas Flow meter with high quality stainless steel 304 material or ss316 optional
B.[Parameters]
| Â Production Name | Â Thermal mass flowmeter |
|  Medium |  all kinds of gas |
| Â Diameter | Â DN20~DN2000 |
|  Flow rate |  0.5~100Nm/s |
| Â Accuracy | Â 1.0%;1.5%Â |
|  Temperature |  Sensor:Ambient temperature:-10~200ºC |
|  |  Max temperature:10~350ºC |
|  |  converter: 10~45ºC |
|  Pressure |  Medium pressure≤4.0Mpa |
|  Power supply |  Integrated:DC24V or AC220V≤180W |
|  |  Splited:AC220V≤19W |
| Â Feedback speed | Â 1s |
| Â Output | Â Standard output:4~20mA;Can customized for RS485 |
| Â Material | Â Stainless steel 304 material |
| Â Display | Â LCD Display |
| Â Display | Â mass flow;volume flow;total flow;time;temperature;standard flow. |
| Â Protection class | Â IP67 |
| Â Converter material | Â stainless steel material |
 1.Flow range
| Â Item | Â The thermal mass flow meter flow range table |
| Â Diameter | Â Flow range (Nm3/h) |
| Â DN20 | Â 1.2~120 |
| Â DN25 | Â 2.5~168.5 |
| Â DN32 | Â 4~275 |
| Â DN40 | Â 6~430 |
| Â DN50 | Â 9~671.5 |
| Â DN80 | Â 20~1718.5 |
| Â DN100 | Â 30~2685Â |
| Â DN150 | Â 60~6045 |
| Â DN150 | Â 60~6045(plug-in) |
| Â DN200 | Â 120~12738.5(plug-in) |
| Â DN250 | Â 150~18779(plug-in) |
| Â DN300 | Â 200~28000(plug-in) |
| Â DN400 | Â 350~48955.5(plug-in) |
| Â DN500 | Â 600~77177.5(plug-in) |
| Â DN600 | Â 800~100000(plug-in) |
C.[Installation]
- Sources of interference is at inlet ,pls take measures to reduce effect the performance
Below is the details for you reference to installa the flow meter with correct ways.
- Â Front staight pipe:Min:15DN
- Â Behind staight pipe:Min:2DN
D.[Company info]
- Our Company is Top 10 Manufacture on Alibaba;
- We have about 30 years of experience in Manufacture;
- Our products have been exported to more 100 coutries and area;
- ISO,SGS,CE and more ceterficates for you reference;
- Patent technology and more than 3 years working life
Â
Brando is a Pneumatic Valve manufacturer and exporter in Ningbo, China, which has more than 10 years experience. The most common types are 2/2 way, 3/2 way, 5/2 way and 5/3 way. The valves can be single or double acting (one or two solenoids).
Brando Supply:
1. 4V Series Pneumatic Solenoid Valves
2. 2V Series Pneumatic Solenoid Valves
3. 4M Series Namur Pneumatic Solenoid Valves
Pneumatic valves are electrically controlled to direct air flow to sequence operations in pneumatic systems. Pneumatic valves are used to control cylinders, rotary actuators, grippers and other pneumatic devices. Use a manifold to simplify plumbing for a bank of valves. Modular systems even allow networked control of valve groups. It is also the interface between electronic controllers and pneumatic systems. This valve allows pneumatic control of position, flow, pressure and temperature.
Pneumatic Valve
Pneumatic Valve,Pneumatic Solenoid Valve,pneumatic directional control valve,5/2 pneumatic valve
NINGBO BRANDO HARDWARE CO.,LTD , https://www.brandopneumatic.com