PPG Protection and Marine Coatings has introduced Phenguard P...

Posted on

Recently, PPG Protective and Marine Coatings introduced Phenguard Pro Coating, an affordable tank coating for shipyards and shipowners.

According to PPG, this coating will provide a 20% higher potential efficiency than a three-layer coating for shipyards and installation work. For shipowners, this coating will provide extensive chemical resistance and longer cargo times of more than 3,400 runs, giving maximum flexibility to the trade in refined tankers.
Based on more than 40 years of practical experience in coatings manufacturing, Phenguard Pro Coatings is a premium tank coating solution for the typical 30,000 to 60,000 DWT IMO II and IMO III chemical/product tankers.
It is reported that the Phenguard Pro coating can be applied to a thickness of 125 microns in two layers, while other tank lining coatings are applied in three layers to achieve this thickness. Because the coating can be used at temperatures as low as 5 ° C, it is a "all year" solution that reduces the heating costs of winter applications. With the addition of this tank coating, PPG will be able to offer the most complete range of finished product and chemical tank lining expert support product selections and best recommendations to the market.
Because Phenguard Pro coatings will provide very smooth finishes that are easy to clean, save time and labor when converting goods and storage tanks. The shipowner will also benefit from the guidance and procedures that the cargo requires pre-cleaning evidence to extend the life of the coating.

Passenger Hoist:

Passenger Hoist, also known as Construction Elevator, can also be an outdoor elevator, site lift cage.

The work lift is mainly used in various kinds of buildings of urban high-rise and super high-rise, because such building height is very difficult to use the material hoist to complete the work.

Due to its unique box structure, construction personnel can ride comfortably and safely.

Construction Hoist is usually used in conjunction with Tower Crane on site.The normal construction lift has a load of 1-10 tons and a running speed of 1-60m/min.

Passenger Hoist Specification Table:

Dubai Construction Elevator ManufacturerRack And Pinion Sc200 Building Construction Lift

NO

ITEM

UNIT

SC200/200

SC100/100

1

Rated Load

Kg

2000/2000

1000/1000

2

Rated lifting speed

m/min

33

33

3

Max lifting height

m

150

150

4

Cage size

m

3*1.3

3*1.3

5

Cage height

m

2.4

2.4

6

Starting current

A

270

270

7

Working current

A

70

70

8

Power consumption

KVA

13*3

13*3

9

Motors power

KW

11*3/11*3

11*2/11*2

10

Mast section weight

Kg

140

140

11

Weight for 150m height

t

20

20

12

Mast section size

m

1.508*6.50*6.50

1.508*6.50*6.50

Application Area: 

Passenger Hoist is used widely in the construction of manned cargo construction machinery, mainly used in the high-rise building interior and exterior decoration, Bridges, chimneys and other construction.

If you have any questions, please contact with us directly. Passenger Hoist are produced with High Quality and Good Appearance. Welcome you can visit our Factory. For inqury, Please send mail directly to us.


Passenger Hoist

Mobile Tower Crane,Travelling Topkit Tower Crane,Self Erecting Traveling Tower Crane,Topless Travelling Tower Crane Passenger Hoist,Goods Hoist,Building Hoist,Hoist Elevator

Jinan East Machinery Co.,Ltd. , https://www.jneastmach.com