PTFE Endless Belt for Hashima Fusing Machine

PTFE Endless belt for Oshima/Hashima fusing machine
What is endless belt?
PTFE endless fusing machine belt is made from PTFE coated fiberglass fabric. The belt surface has thermal transfer and high temperature resistance characteristic. Seamless belt overcomes the disavantage of joint belt such as bad stability, ruptures and deflecting on different girth for two sides at the joint. The using life is much longer than joint belt.


Features of teflon endless belt:
1)High temperature resistance and adherence resistance;
2)Good tensile strength, preventing deflecting;
3)Excellent capability of resistance of static;
4)Smooth surface, more suits for super thin lining;
5)Flex fatigue resistance, durable, long using life;
 
Specification of seamless belt: 
Popular sizes of Oshima fusing machine belt:
OP-450GS : 460*1530/1840mm
OP-450GSL: 460*1530/2440mm
OP-520GS : 520*1530/1840mm
OP-520GSL:520*1530/2440mm
Note: we can make the belt according to your required size.
Available length of seamless belt: 1360mm to 6700mm; Max width: 1600mm.
 
Packing of Teflon endless belt:
We packed the belt with several paper tube inside which greatly reduced the chance of belt wrinkle. Outside protected with bubble film and then in carton box.
 
Why choose our product:
Our fusing machine belts are excellent compatible with many well-known fusing machines in the world, such as Hashima, Oshima, Meyer, Martin, Kannegiesser&etc.
 
 






 

VOCs Catalytic Combustion System consists of four(or three) activated carbon adsorption tanks and a catalytic combustion chamber. The exhaust gas in the production line is collected and sent to the gas collection box, and then the exhaust gas is sent to the filter to filter out the dust in the exhaust gas, thereby preventing the activated carbon micropores from being blocked. The filtered exhaust gas enters the adsorption chamber, and the activated carbon adsorbs the VOCs in the exhaust gas. When the activated carbon adsorber is close to saturation, the saturated activated carbon adsorber is desorbed and desorbed by the hot gas flow, and the organic matter is desorbed from the activated carbon. During the desorption process, the organic waste gas has been concentrated, and the concentration is increased by several tens of times to more than 2000 mg/m3. The concentrated exhaust gas is sent to the catalytic combustion device, and finally decomposed into CO 2 and H 2 O and discharged. After the analytical desorption is completed, the activated carbon adsorber enters the standby state. When the other activated carbon adsorbers are close to saturation, the system automatically switches back, and the saturated activated carbon adsorber is analytically desorbed, so that the cycle works. The finally cleaned clean gas is discharged into the atmosphere by the main exhaust fan

VOC Gas Treatment Equipment

Voc Treatment System,Voc Treatment Equipment,Vocs Catalytic Combustion,Voc Gas Treatment Equipment

Botou Ever Lucky Environmental Protection Machinery Co., LTD , https://www.dustcontrolling.com