b) Provide data download Using special software fluid flow trend software, you can download the data in the display to get the lubricant consumption, daily over-lubrication and under-lubrication, lubrication cycle time, total cycle time of the oil distributor, total compressor running time. Wait.
Setting the shutdown alarm time or wiring mode (2 red lines) switching between N/O or N/C alarm time can be changed from 30240s, making it more adaptable. JGT4 is recommended to be set to 30s to prevent the compressor from being dry for too long.
The data is transmitted to the compressor control system and the lubricant data is transmitted to the PLC, the counter, and the control system through two lines.
The fluid flow display is installed with 2 AA batteries to replace the disposable battery, thus extending the life of the site.
Adjusting the pressure of the lubricating oil system and the normal lubrication condition The lubricating oil line pressure is at least 110% of the cylinder inlet pressure so that the lubricating oil can be injected into the cylinder. Adjusting the adjustable bolts clockwise (for example) increases the oil pressure, and adjusting the adjustable bolts counterclockwise reduces the oil pressure. The normal pressure of the lubrication system is 414 kPa.
Blind Flanges are manufactured without a bore and used to blank off the ends of piping, Valves and pressure vessel openings.
From the standpoint of internal pressure and bolt loading, blind flanges, particularly in the larger sizes, are the most highly stressed flange types.
However, most of these stresses are bending types near the center, and since there is no standard inside diameter, these flanges are suitable for higher pressure temperature applications.
Blind Flange,Blank Flange,Blind Plate,Pipe Blind Flange
Fuyuan Marine Accessories Co., Ltd , https://www.fymarineparts.com