100kgf Electric Linear Actuator Motor Linear Actuator Hydraulic Cylinder Actuator

Technical parameters:
Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of Other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.

Our company produced the DT type, HDG series of electric putt (electric cylinder). Push (pull) force from
0.25KN to 50KN; push and pull stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurate
action, reliable performance, and has built-in overload protection of the mechanical rotation device. In a very
wide range of areas can replace or replace the cylinder, the cylinder, especially in high temperature, fire,
explosion-proof, pollution-free environmental conditions, is an indispensable supporting equipment.
The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by the
user.
To facilitate automatic control or to achieve a special trajectory, according to user requirements, can be
configured DC, frequency, step, speed and other special motor to meet the total control requirements.
Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processing
and other departments. 

Technical specification:
Model# introduction:


Structure drawing:



Workshop




OUR SALES TEAM


Order Instructions
When you choose our company product, please offer following data:
1.what's the voltage? DC OR AC
2.what's the stroke ?
3.What's the  thrust ?
4.what's your order quanitity ?
Other requirement:                                                                                                        

Notes: 
1.We also can design special products according to customer's particular requirements.
2.The final dimension is subject to outline drawing.

Dear clients, if there is any enquiry or requirement, please feel free to contact with us in any time. Technical parameters:
Introduction:
The electric actuator is a reciprocating actuator driven by a motor. It is suitable for all linear motion which needs
reciprocating and pushing. It can swing and rotate by means of other connecting rods. It has overload
protection (mechanical and electrical overload protection) It is widely used in metallurgy, electric power, coal,
chemical and other industries. It is widely used in metallurgy, electric power, coal, chemical industry and so on,
with the advantages of light weight, strong pulling force, low noise, low energy consumption and convenient
installation and maintenance. , Especially for long-distance, high-altitude and dangerous situations instead of
hydraulic, pneumatic devices, can be operated separately on-site and centralized control.
Because the nut is fixed relative to the push rod, the screw moves the push rod linearly along the guide rail in
the guide sleeve so as to make the push rod reciprocate. As a result, Push and pull action.

Our company produced the DT type, HDG series of electric putt (electric cylinder). Push (pull) force from
0.25KN to 50KN; push and pull stroke speed were 25mm / s, 42mm / s, 84mm / s. Is a smooth and accurate
action, reliable performance, and has built-in overload protection of the mechanical rotation device. In a very
wide range of areas can replace or replace the cylinder, the cylinder, especially in high temperature, fire,
explosion-proof, pollution-free environmental conditions, is an indispensable supporting equipment.
The series, the specifications of the push and pull stroke size or speed (0-100mm / s) can be selected by the
user.
To facilitate automatic control or to achieve a special trajectory, according to user requirements, can be
configured DC, frequency, step, speed and other special motor to meet the total control requirements.
Products are widely used in electricity, machinery, metallurgy, transportation, coal, chemicals, food processing
and other departments. 

Technical specification:
Model# introduction:


Structure drawing:



Workshop




OUR SALES TEAM


Order Instructions
When you choose our company product, please offer following data:
1.what's the voltage? DC OR AC
2.what's the stroke ?
3.What's the  thrust ?
4.what's your order quanitity ?
Other requirement:                                                                                                        

Notes: 
1.We also can design special products according to customer's particular requirements.
2.The final dimension is subject to outline drawing.

Dear clients, if there is any enquiry or requirement, please feel free to contact with us in any time.

Product description

The steel cage roll welder can automatically handle the pile cage 15m-27m. According to the construction requirements, the transverse steel bars are inserted into the sleeves fixed on the rotating disc, and the longitudinal round wires are taken and welded to a transverse reinforcing bar.

Features

1. The steel cage rolling welder has high automation degree and wide application range. It has adjustable steel cage diameter, adjustable main reinforcement number, adjustable hoop distance and adjustable motor speed. 

2. The whole machine adopts advanced modular planning thinking, which can be conveniently disassembled and assembled, with friendly control interface, simple and convenient operation, and convenient transportation. 

3, key parts, using high standard production specifications, reduce equipment failure rate, reduce operating costs. 

4. The steel cage rolling welder has strong adaptability to the site, and can be reasonably placed according to the size of the site and the length of the steel cage.

CNC Steel Cage Welding Machine

Steel Welding Machine,Steel Cage Welding Machine,Stainless Steel Welding Machine,Cnc Steel Cage Welding Machine

Boron Machinery Manufacturing CO. LTD , https://www.boronjx.com