A plunger pump is a type of positive displacement pump where the high-pressure seal is stationary and a smooth cylindrical plunger slides through the seal. The element is a component of the inline diesel pump and its function is to meter and deliver the metered fuel to the injectors. Element consists of two components, barrels and plungers. The plunger is matched to its barrel with high precision and grants hydraulic withhold at all pressures, even very high pressures and low engine revolutions. The plunger is precisely fitted to the barrel with very small clearance to form a perfect sealing. They must therefore be replaced as a set (barrel and plunger).
Rotary piston and plunger pumps use a crank mechanism to create a reciprocating motion along an axis, which then builds pressure in a cylinder or working barrel to force gas or fluid through the pump. The pressure in the chamber actuates the valves at both the suction and discharge points. Plunger pumps are used in applications that could range from 70 to 2,070 bar (1,000 to 30,000 psi).
We manufacture new plungers & Barrels for all types of pumps: PS7100, P8500, A, AD, CAT, EP9, Cummins, MW, P, PN, PW, TICS.
Part after manufacture they undergo heat treatment to the required hardness, as well as special treatment and stabilization for improved operation life.
Methodology
The methology & techniques that are applied to the reconstruction or construction of plungers & barrels contribute to:
Maximum control of fuel leakage resulting in the reduction of the engine`s maintenance costs.
Also there is a large stock of ready-made Plungers & Barrels for most of types.
Parts after manufacturing undergo 100% quality control tests. These tests consist of both dimensional and functional procedures to ensure proper operation of the component.
Please do not hesitate to contact me if you require further information.
Rutile Tio2,Titanium Pigment,Titanium White Paint,Titanium Dioxide In Makeup
TINOX CHEMIE GMBH , https://www.tinoxglobal.com