Product Description
1>It can drill up to 620M (when drilling diameter is 500mm)
2>it adopts to SINOTRUCK "HOWO" brand truck chassis,is one rotary turntable drilling rig;
All main components are installed on the truck,very convenient.
3>Can apply to various geological conditions,such as clay,sand,rock layers and so on;
When facing mud rock,strongly weathered rock etc.,can use the auxiliary press device to help drill in,improving the efficiency.
4>Mainly Mechanical transmission,hydraulic foot clamps,pneumatic control the mud pump etc,easy to operate.
5>it has strong Torque,High Efficiency,Bright appearance,is applicable for water conservancy project, geological survey and exploration,geothermal air conditioner and other pile foundation proiects and so on.Very founctional
6>equip 141KW cummins engine ,BW1100 mud pump
Main characteristics and Applications
This drilling rig features in best maneuver ability, compact construction, high integrity, economical transportation, simple operation,reliable transmission,etc.Other applications as follow:
1.It is equipped with the breakout-gun cylinder. After loosening the first turn of thread of the lock joint with the aid of breakout-gun cylinder, the drill pipe can be rotated in counter-clockwise direction by rotary table to reduce greatly the labor intensity and prolong service life of the component parts.
2.The drilling rig is equipped a mud pump of changing- cylinder for construction.
3.The drilling rig is equipped four jacks to reduce physical labor and improved installation efficiency.
4.To upgrade the versatility in application, standard parts and components.
The drilling rig may be used for drilling in quaternary period stratum and matrix. Main applications are as follows:
(1)Â Exploration and investigation of hydro-geological condition.
(2)Â Water well drilling for agriculture irrigation, industry and national defense.
(3)Â Ventilation of underground tunnel. It can also be used selectively in building engineering.
Technical DataÂ
Drilling capacity |  | |
Power | BF6L913C | |
Drilling Depth | 620m | |
Diameter of hole | Open-hole 500mm |
End hole 190mm |
Drilling pipe | 89*9*6000mm 73*7*6000mm |
|
Max. Through hole diameter of rotary | 505mm | |
Driving Kelly | 108*108*7315mm | |
Mast | Â | |
Effective height | 11m | |
Rated load of hook | 25T | |
Hoisting system | 3*4 | |
Dimensions (in transportation state) (L*W*H)Â | 12000*2500*4230mm | |
Total weight | 27T | |
Max. Truck speed | 73Km/h | |
Away angle | 13.5 |
Model | BF6L913C | 6135AN |
Type | Air-cooling Diesel engine |
Water-cooling Diesel engine |
Liner size | 102*125mm | 135*150mm |
Power | 141KW/2500r/ min | 100KW/1500r/ min |
Max torque | 490N.m/1650r/min | 647N.m/1250r/min |
Factory:
At Work Site:
popular used truck mounted water well drilling rig for sale(HFT600ST)
Product Description
1>It can drill up to 620M (when drilling diameter is 500mm)
2>it adopts to SINOTRUCK "HOWO" brand truck chassis,is one rotary turntable drilling rig;
All main components are installed on the truck,very convenient.
3>Can apply to various geological conditions,such as clay,sand,rock layers and so on;
When facing mud rock,strongly weathered rock etc.,can use the auxiliary press device to help drill in,improving the efficiency.
4>Mainly Mechanical transmission,hydraulic foot clamps,pneumatic control the mud pump etc,easy to operate.
5>it has strong Torque,High Efficiency,Bright appearance,is applicable for water conservancy project, geological survey and exploration,geothermal air conditioner and other pile foundation proiects and so on.Very founctional
6>equip 141KW cummins engine ,BW1100 mud pump
Main characteristics and Applications
This drilling rig features in best maneuver ability, compact construction, high integrity, economical transportation, simple operation,reliable transmission,etc.Other applications as follow:
1.It is equipped with the breakout-gun cylinder. After loosening the first turn of thread of the lock joint with the aid of breakout-gun cylinder, the drill pipe can be rotated in counter-clockwise direction by rotary table to reduce greatly the labor intensity and prolong service life of the component parts.
2.The drilling rig is equipped a mud pump of changing- cylinder for construction.
3.The drilling rig is equipped four jacks to reduce physical labor and improved installation efficiency.
4.To upgrade the versatility in application, standard parts and components.
The drilling rig may be used for drilling in quaternary period stratum and matrix. Main applications are as follows:
(1)Â Exploration and investigation of hydro-geological condition.
(2)Â Water well drilling for agriculture irrigation, industry and national defense.
(3)Â Ventilation of underground tunnel. It can also be used selectively in building engineering.
Technical DataÂ
Drilling capacity |  | |
Power | BF6L913C | |
Drilling Depth | 620m | |
Diameter of hole | Open-hole 500mm |
End hole 190mm |
Drilling pipe | 89*9*6000mm 73*7*6000mm |
|
Max. Through hole diameter of rotary | 505mm | |
Driving Kelly | 108*108*7315mm | |
Mast | Â | |
Effective height | 11m | |
Rated load of hook | 25T | |
Hoisting system | 3*4 | |
Dimensions (in transportation state) (L*W*H)Â | 12000*2500*4230mm | |
Total weight | 27T | |
Max. Truck speed | 73Km/h | |
Away angle | 13.5 |
Model | BF6L913C | 6135AN |
Type | Air-cooling Diesel engine |
Water-cooling Diesel engine |
Liner size | 102*125mm | 135*150mm |
Power | 141KW/2500r/ min | 100KW/1500r/ min |
Max torque | 490N.m/1650r/min | 647N.m/1250r/min |
Factory:
At Work Site:
NINGBO RUICAN MACHINERY CO.,LTD owns the CNC machining workshop,have the capability to offer machining services to our clients.
Aluminum Machined Parts are commonly machined in a different variety of Aluminum alloy, the most common being 6061-T6 material. We cater to the electronics, transportation, medical,and security industries as well as others that require custom Aluminum prototypes. Aluminum parts are machined and shipped in 10~15 work days standard, with expedites available. Request for Quotes for aluminum machined parts are generally returned within 24 hours, standard lead time for raw parts is 10 days. Small quantities are warmly welcomed.
Common Aluminum Alloys:
Aluminum 2024
Aluminum 6061-T6
Aluminum 6063
Aluminum 7075
Aluminium Machining Parts,Aluminium CNC Machining Parts,Machining Aluminum Gear Parts,Custom Aluminium Machining Parts
Ningbo City Yinzhou Ruican Machinery Co.,Ltd , https://www.kstcasting.com