S&A knew a special customer, Mr. Li. Mr. Li comes from a high-end
equipment research institute, which mainly researches on the scheme for
complete set of equipment and serves the development needs of local
high-end equipment manufacturing industry.
It is learned that, Mr. Li had four sets of shaft equipment, with a total power of 17KW, which needed to be cooled with a water chiller. We recommended S&A CW-6300EN460H water chiller to Mr. Li.
At the same time, Mr. Li said that most of his service objects were in the northern part. Considering that the water chiller may fail to be started due to excessively-low temperature (or freezing of water) as the temperature is low in winter in the northern part, the sales personnel of S&A offered some suggestions in a proactive way on dealing with the problem.
If the water in the water tank freezes, then the customer may melt the ice with warm water, and then add appropriate amount of antifreeze. Antifreeze can prevent ice from freezing again. The temperature of melted water is still very low, then, the customer may add appropriate amount of warm water; or install a heating rod to raise the temperature of water quickly and ensure the normal operation of water chiller.
PS: It is required to control the degree of dilution of antifreeze according to the specification, as over-high concentration may damage the shaft seal of water pump. In addition, antifreeze can`t be used for a long time, and when the weather warms up and water can`t freeze, it is required to draw off the water in the water tank and add purified water.
Mr. Li praised the employees of S&A for their seriousness and the sense of responsibility, as they actively considered the fault that water chiller may occur due to regional difference and gave suggestions. This kind of spirit made Mr. Li directly place order without hesitation.
Thank you so much for your support and trust in S&A. All S&A water chillers have passed the certification of ISO, CE, RoHS and REACH, and the warranty period has been extended to 2 years. Our products are worthy of your trust!
S&A has a perfect laboratory test system to simulate the use environment of water chillers, conduct high-temperature test and improve quality continuously, aiming to make you use at ease; and S&A has a complete material purchasing ecological system and adopts the mode of mass production, with annual output of 60000 units as a guarantee for your confidence in us.
The techincal parameter of CW-6300EN: http://Products/ChillerCW63008500Wco.html
It is learned that, Mr. Li had four sets of shaft equipment, with a total power of 17KW, which needed to be cooled with a water chiller. We recommended S&A CW-6300EN460H water chiller to Mr. Li.
At the same time, Mr. Li said that most of his service objects were in the northern part. Considering that the water chiller may fail to be started due to excessively-low temperature (or freezing of water) as the temperature is low in winter in the northern part, the sales personnel of S&A offered some suggestions in a proactive way on dealing with the problem.
If the water in the water tank freezes, then the customer may melt the ice with warm water, and then add appropriate amount of antifreeze. Antifreeze can prevent ice from freezing again. The temperature of melted water is still very low, then, the customer may add appropriate amount of warm water; or install a heating rod to raise the temperature of water quickly and ensure the normal operation of water chiller.
PS: It is required to control the degree of dilution of antifreeze according to the specification, as over-high concentration may damage the shaft seal of water pump. In addition, antifreeze can`t be used for a long time, and when the weather warms up and water can`t freeze, it is required to draw off the water in the water tank and add purified water.
Mr. Li praised the employees of S&A for their seriousness and the sense of responsibility, as they actively considered the fault that water chiller may occur due to regional difference and gave suggestions. This kind of spirit made Mr. Li directly place order without hesitation.
Thank you so much for your support and trust in S&A. All S&A water chillers have passed the certification of ISO, CE, RoHS and REACH, and the warranty period has been extended to 2 years. Our products are worthy of your trust!
S&A has a perfect laboratory test system to simulate the use environment of water chillers, conduct high-temperature test and improve quality continuously, aiming to make you use at ease; and S&A has a complete material purchasing ecological system and adopts the mode of mass production, with annual output of 60000 units as a guarantee for your confidence in us.
The techincal parameter of CW-6300EN: http://Products/ChillerCW63008500Wco.html
CONTACT S&A
TE:+86-20-89301885
FAX:+86-20-84309967
SKYPE: teyuchiller
Email:
Website: http://
OSFE INDUSTRIAL CO.,LTD , https://www.1758cookware.com